Abstract:As one of the commonly-used solid dosage forms, pharmaceutical tablets have been widely used to deliver active drugs into the human body, satisfying patient’s therapeutic requirements. To manufacture tablets of good quality, diluent powders are generally used in formulation development to increase the bulk of formulations and to bind other inactive ingredients with the active pharmaceutical ingredients (APIs). For formulations of a low API dose, the drug products generally consist of a large fraction of diluent powders. Hence, the attributes of diluents become extremely important and can significantly influence the final product property. Therefore, it is essential to accurately characterise the mechanical properties of the diluents and to thoroughly understand how their mechanical properties affect the manufacturing performance and properties of the final products, which will build a sound scientific basis for formulation design and product development. In this study, a comprehensive evaluation of the mechanical properties of the widely-used pharmaceutical diluent powders, including microcrystalline cellulose (MCC) powders with different grades (i.e., Avicel PH 101, Avicel PH 102, and DG), mannitol SD 100, lactose monohydrate, and dibasic calcium phosphate, were performed. The powder compressibility was assessed with Heckel and Kawakita analyses. The material elastic recovery during decompression and in storage was investigated through monitoring the change in the dimensions of the compressed tablets over time. The powder hygroscopicity was also evaluated to examine the water absorption ability of powders from the surroundings. It was shown that the MCC tablets exhibited continuous volume expansion after ejection, which is believed to be induced by (1) water absorption from the surrounding, and (2) elastic recovery. However, mannitol tablets showed volume expansion immediately after ejection, followed by the material shrinkage in storage. It is anticipated that the expansion was induced by elastic recovery to a limited extent, while the shrinkage was primarily due to the solidification during storage. It was also found that, for all powders considered, the powder compressibility and the elastic recovery depended significantly on the particle breakage tendency: a decrease in the particle breakage tendency led to a slight decrease in the powder compressibility and a significant drop in immediate elastic recovery. This implies that the particle breakage tendency is a critical material attribute in controlling the compression behaviour of pharmaceutical powders.

The effect of granules characters on mechanical properties of press-coated tablets: A comparative study

The Influence of Particles' Aspect Ratio on the Shear Behaviour of Granular Materials

Process Investigation of A Novel Compaction Technique with Pellet-Containing Granules

The effect of some binding agents on the mechanical properties of granules and their compression characteristics

Evaluation of Compressive Strength and Shear Strength of the Adhering Layer of Granules in Iron Ore Sintering

Novel Compaction Techniques with Pellet-Containing Granules

Dependence of Tablet Brittleness on Tensile Strength and Porosity.

A formulation strategy for solving the overgranulation problem in high shear wet granulation.

On Identification of Critical Material Attributes for Compression Behaviour of Pharmaceutical Diluent Powders

Application of Definitive Screening Design to Quantify the Effects of Process Parameters on Key Granule Characteristics and Optimize Operating Parameters in Pulsed-Spray Fluid-Bed Granulation

Influence of processing methods on physico-mechanical properties of Ibuprofen/HPC-SSL formulation

Studies on the Influence of High-Shear Granulation Process on the Compressibility of Microcrystalline Cellulose

Using a Material Library to Understand the Change of Tabletability by High Shear Wet Granulation

Effects of Formulation Parameters and Process Variables on the Properties of Granules Obtained by Reactive Granulation

Improvement of the Stability of Doxycycline Hydrochloride Pellet-Containing Tablets Through A Novel Granulation Technique and Proper Excipients

Mechanistic Investigation on the Performance of Huperzine A Loaded Microparticles Based on Ultra-Fine Particle Processing System

Using in-line measurement and statistical analyses to predict tablet properties compressed using a Styl'One compaction simulator: A high shear wet granulation study

The effect of excipient particle size on the reduction of compactibility after roller compaction

Research on the Performance Influence of Partly Granulation Technology for Friction Materials

Determining the Impact of Roller Compaction Processing Conditions on Granulate and API Properties: Impact of Formulation API Load

Study on Preparation Technology and Physical Fingerprint of Chuilian Jianpi Granules Based on QbD