Abstract:As one of the commonly-used solid dosage forms, pharmaceutical tablets have been widely used to deliver active drugs into the human body, satisfying patient’s therapeutic requirements. To manufacture tablets of good quality, diluent powders are generally used in formulation development to increase the bulk of formulations and to bind other inactive ingredients with the active pharmaceutical ingredients (APIs). For formulations of a low API dose, the drug products generally consist of a large fraction of diluent powders. Hence, the attributes of diluents become extremely important and can significantly influence the final product property. Therefore, it is essential to accurately characterise the mechanical properties of the diluents and to thoroughly understand how their mechanical properties affect the manufacturing performance and properties of the final products, which will build a sound scientific basis for formulation design and product development. In this study, a comprehensive evaluation of the mechanical properties of the widely-used pharmaceutical diluent powders, including microcrystalline cellulose (MCC) powders with different grades (i.e., Avicel PH 101, Avicel PH 102, and DG), mannitol SD 100, lactose monohydrate, and dibasic calcium phosphate, were performed. The powder compressibility was assessed with Heckel and Kawakita analyses. The material elastic recovery during decompression and in storage was investigated through monitoring the change in the dimensions of the compressed tablets over time. The powder hygroscopicity was also evaluated to examine the water absorption ability of powders from the surroundings. It was shown that the MCC tablets exhibited continuous volume expansion after ejection, which is believed to be induced by (1) water absorption from the surrounding, and (2) elastic recovery. However, mannitol tablets showed volume expansion immediately after ejection, followed by the material shrinkage in storage. It is anticipated that the expansion was induced by elastic recovery to a limited extent, while the shrinkage was primarily due to the solidification during storage. It was also found that, for all powders considered, the powder compressibility and the elastic recovery depended significantly on the particle breakage tendency: a decrease in the particle breakage tendency led to a slight decrease in the powder compressibility and a significant drop in immediate elastic recovery. This implies that the particle breakage tendency is a critical material attribute in controlling the compression behaviour of pharmaceutical powders.

The effect of some binding agents on the mechanical properties of granules and their compression characteristics

The effect of granules characters on mechanical properties of press-coated tablets: A comparative study

Effect of mode of incorporation of disintegrants on the characteristics of fluid-bed wet-granulated tablets

Novel Compaction Techniques with Pellet-Containing Granules

Pre-plasticization of thermal binder facilitates processing and granule growth during melt granulation of gabapentin using co-rotating twin screw extruder

The Effect of Microcrystalline Cellulose–CaHPO4 Mixtures in Different Volume Ratios on the Compaction and Structural–Mechanical Properties of Tablets

Process Investigation of A Novel Compaction Technique with Pellet-Containing Granules

Influence of processing methods on physico-mechanical properties of Ibuprofen/HPC-SSL formulation

Functionality of wet-granulated disintegrant in comparison to directly incorporated disintegrant in a poorly water-soluble tablet matrix

Evaluation with Compression Equations of Compression Behavior of Pellets with Different Intragranular Pore Volumes

Binding Effects of Organic and Inorganic Powder on Shear and Tensile Strengths of Granular Material Packing

Impact of non-binder ingredients and molecular weight of polymer binders on heat assisted twin screw dry granulation

Physicochemical Characterization and Evaluation of the Binding Effect of Acacia etbaica Schweinf Gum in Granule and Tablet Formulations

The effect of excipient particle size on the reduction of compactibility after roller compaction

On Identification of Critical Material Attributes for Compression Behaviour of Pharmaceutical Diluent Powders

Application of co-precipitated glutinous rice starch as a multifunctional excipient in direct compression tablets

Effect of hydroxy propyl cellulose grade and foam quality on foam granulation of a high drug load formulation

Preparation of Pellets with Different Porosity and Characterization of Physical Properties and Compressibility

In-line monitoring of compaction properties on a rotary tablet press during tablet manufacturing of hot-melt extruded amorphous solid dispersions

Preparation and Quality Evaluation of a Novel Multi-Unit Dosage Form by Compaction of Enteric Pellets

Effects of Processing on a Sustained Release Formulation Prepared by Twin-Screw Dry Granulation