Abstract:Mg-based amorphous alloys have broad applications due to disordered atomic structure, thermal stability, crystallinity, low elastic modulus and high strength. In the present study, Mg–Ni–Gd–Yb–Ag alloys were prepared by vacuum arc melting combined with copper roll melt spinning. The addition of trace amounts of ytterbium (Yb) improved the corrosion resistance of Mg 73-X Ni 15 Gd 10 Yb X Ag 2 (x = 2,4,6,8 at.%). Electrochemical experiments, immersion tests and analysis of corrosion products by XPS and EDS showed that Mg 67 Ni 15 Gd 10 Yb 6 Ag 2 exhibited the best corrosion resistance with an E corr of − 968 mV and an I corr of 5.93 μA/cm 2 . The superior corrosion performance was attributed to the presence of corrosion passivation films comprising MgO, Mg(OH) 2 , Ni(OH) 2 , Ag 2 O, AgCl, Ca 5 (PO 4 ) 3 (OH), as well as rare-earth oxides Gd 2 O 3 and Yb 2 O 3 . These compounds efficiently shield the matrix, and the microstructure corrosion mechanism of Mg–Ni–Gd–Yb–Ag involves a cyclic process that includes surface film layer dissolution, matrix corrosion and film layer regeneration, leading to oxide attachment. The addition of the appropriate amount of rare-earth element Yb to Mg-based amorphous alloys can improve the corrosion resistance, thereby increasing the application prospects of alloys.

Electrochemical Corrosion Behavior of Mg-Al Alloy with Micro-Alloying of Yttrium in a Chloride Solution

The Effects of a Corrosion Product Film on the Corrosion Behavior of Mg-Al Alloy with Micro-Alloying of Yttrium in a Chloride Solution

Influence of Yttrium Element on the Corrosion Behaviors of Mg–Y Binary Magnesium Alloy

Corrosive wear resistance of Mg-Al-Zn alloys with alloyed yttrium

Effects of Rare Earth Yttrium on Microstructure and Properties of Mg-Al-Zn Alloy

Microstructure and Corrosion Resistance of Mg-5Al-1Sr-2Ca-XY Alloy

Relationship Between Extrusion, Y and Corrosion Behavior of Mg–Y Alloy in NaCl Aqueous Solution

Effects of Alloying Elements on the Microstructure and Corrosion Behavior of Mg–Li–Al–Y Alloys

Corrosion Behavior of Mg-Zn-Y-Zr Alloys in Nacl Solution

Effect of Y Content on Corrosion Resistance of Mg-Zn-Y Alloys

Surface microstructure and corrosion resistance characterization of Mg-based amorphous alloys

Influence of Yttrium Addition on the Corrosion Behaviour of As-Cast Mg–8Li–3Al–2Zn Alloy

Influence of Nd and Y Additions on the Corrosion Behaviour of Extruded Mg-Zn-Zr Alloys

Intercalation of Y in Mg-Al layered double hydroxide films on anodized AZ31 and Mg-Y alloys to influence corrosion protective performance

Microstructure and Corrosion Behavior of As-Extruded Mg-6.5Li-xY-yZn Alloys

Galvanic Corrosion Behavior and Three Protection Techniques of Magnesium Alloy Coupled to A6N01S-T5 Aluminum Alloy in NaCl Solution

Influence of EDTA-2Na Concertration on the Microstructure and Corrosion Behaviors of Mg-Al-Y Alloy

Effect of Y Concentration on the in Situ Growth Behavior and Corrosion Protection of the MgAlY-LDH Sealing Film on the Anodized Surface of Mg–2Zn–4Y Alloy

The Influence of the Y Element on Fine Texture and Corrosion Behavior of Foundry Mg-5Al-2Zn-0.2Mn Alloys

Enhancing the Intergranular Corrosion Resistance of High Mg‐alloyed Al–Mg Alloy by Y Addition

Effect of Solid-Solution Treatment on Corrosion and Electrochemical Behaviors of Mg-15Y Alloy in 3.5 Wt.% NaCl Solution