Abstract:A photonic lantern is a low-loss device that connects a single multimode waveguide to multiple single-mode waveguides and can enhance the beam quality of a fiber laser by adaptively controlling the optical parameters (amplitude, phase, polarization) at the input. In this work, we combined the gains and losses of individual modes within the fiber amplifier and introduced a mode content parameter at the amplifier's output as an evaluation function to simulate mode control effects. Mode competition within the gain fiber can degrade the control effect of the fundamental mode and lead to it taking a longer time for the control to converge. Optimal parameters, such as the gain fiber length and pumping method, were identified to improve control effectiveness. Specifically, an optimal gain fiber length of 8 m was determined, and backward pumping was found to achieve higher pumping efficiency and better control results. The system demonstrated significant power amplification potential and could stabilize mode control under different pumping powers ranging from 50 W to 5 kW. In conclusion, our research demonstrates that an adaptive fiber amplifier based on a photonic lantern can achieve a stable, high-power, large-mode-field, near-fundamental-mode output from the gain fiber. Although mode competition within the gain fiber can degrade the control effect of the fundamental mode and cause the control to take a longer time to converge, these aspects should be further studied to improve the control's effectiveness. These findings contribute to the development of advanced simulation models that guide high-power mode control experiments and deepen our understanding of physical processes in science and technology.

Stable Single Transverse Mode Excitation in 50 Μm Core Fiber Using a Photonic-Lantern-based Adaptive Control System

High-contrast and High-Stable Wavefront Shaping Multimode Fiber Imaging

Optimization of Few-Mode-Fiber Based Mode Converter for Mode Division Multiplexing Transmission

Realizing a kilowatt-level fiber amplifier with a 42 μm core diameter fiber for improved multi-mode performance towards single mode operation output through adaptive spatial mode control utilizing a 3×1 photonic lantern

Mitigating mode instabilities by controllable mode beating excitation with a photonic lantern

High-Power Orbital Angular Momentum Beam Generation Using Adaptive Control System Based on Mode Selective Photonic Lantern

An Multi-to-single Mode Conversion Experiment Using the Tapered Fiber

Mode-Dependent Loss Equalized Few-Mode Fiber Photonic Lantern

Wideband, large mode field and single vector mode transmission in a 37-cell hollow-core photonic bandgap fiber

Study of mode propagation with 632.8-nm laser in tapered fiber

The Simulation of Mode Control for a Photonic Lantern Adaptive Amplifier

Stress-Induced Polarization-Maintaining Large-Mode-Area Photonic Crystal Fibers With Deviation of the Single-Mode Transmission Band and Delocalization of Higher-Order Modes

Transverse mode instability mitigation in high-power confined-doped fiber amplifier with good beam quality through seed laser control

Design of Self-Matching Photonic Lantern for High-Order Transverse-Mode Laser Systems

Single-mode Annular Chirally-Coupled Core Fibers for Fiber Lasers

Stable Generation of Cylindrical Vector Beams with an All-Fiber Laser Using Polarization-Maintaining and Ring-Core Fibers.

Mode-Selective Photonic Lanterns with Double-Clad Fibers

Single- and dual-wavelength fiber laser with multi-transverse modes

Single vector mode transmission in hollow-core photonic bandgap fiber based on surface mode coupling effect

Mitigating transverse mode instability in fiber laser oscillator by employing direct pump modulation

Fabrication and Characterization of Photonic Lanterns Using Coupled-Mode Theory