Abstract:For fully autonomous implantable or body-worn devices running on harvested energy, the peak and average power dissipation of the radio transmitter must be minimized. Additionally, link symmetry must be maintained for peer-to-peer network applications. We propose a highly integrated 90 μW 400 MHz MICS band transmitter with an output power of 20 μW, leading to a 22% global efficiency - the highest reported to date for low-power MICS band systems. We introduce a new transmitter architecture based on cascaded multi-phase injection locking and frequency multiplication to enable low power operation and high global efficiency. Our architecture eliminates slow phase/delay-locked loops for frequency synthesis and uses injection locking to achieve a settling time <;250 ns permitting very aggressive duty cycling of the transmitter to conserve energy. At a data-rate of 200 kbps, the transmitter achieves an energy efficiency of 450 pJ/bit. Our 400 MHz local oscillator topology demonstrates a figure-of-merit of 204 dB while locked to a stable crystal reference. The transmitter occupies 0.04 mm2 of active die area in 130 nm CMOS and is fully integrated except for the crystal and the matching network.

A Low‐power Amplitude Shift Keying Modulator Based on Adaptive Body‐biased Injection‐locked Current‐reuse Voltage Controlled Oscillator for High Data Rate Radio Frequency Identification Applications

Optimal Design of a Low-Power, Phase-Switching Modulator for Implantable Medical Applications.

A 0.6-V Zero-IF/Low-IF Receiver with Integrated Fractional-N Synthesizer for 2.4-Ghz ISM-Band Applications.

A 40 Nm Cmos V-Band Vco with On-Chip Body Bias Voltage Control Technique

A Low Power Sub-GHz PLL with Optimized Class-C Voltage-controlled Oscillator

Self-Adaptive Low-Voltage Current Mode ASK Demodulator for RFID Tags

Novel Low-Voltage / Low-Power ASK Demodulator for RFID Tags

A Low-power ASK Demodulator for Wireless Power and Data Transfer Systems Supporting Ultra-low Modulation Depth of 0.03%.

A Low-Power, High Data-Rate CMOS ASK Transmitter for Wireless Capsule Endoscopy

An Analysis of An ASK Demodulator With Dual Self-Biased Separated Voltages for Implantable Applications

A Wide-Input-Range Low-Power Ask Demodulator For Wireless Data Transmission In Retinal Prosthesis

An Ultra Low Power ASK Demodulator for Passive UHF RFID Tag

A Low-Power Injection-Locked VCO for an Implantable MICS Band Transmitter with Wireless Frequency Reference and Tune-while-Lock Channel Calibration

A 0.65 mW 2.3–2.5GHz low phase noise LC-VCO with adaptive body biasing technique

A Wideband and Low Power Dual-Band ASK Transceiver for Intra/inter-Chip Communication

A Sub-100 $\mu$ W MICS/ISM Band Transmitter Based on Injection-Locking and Frequency Multiplication

An ASK Data Demodulator Circuit for Implantable Medical Devices Supporting a Minimum Modulation Depth of 0.034%

An 11 pJ/Bit Multichannel OOK/FSK/QPSK Transmitter With Multi-Phase Injection-Locking and Frequency Multiplication Techniques

A 5.9mw 50mbps CMOS QPSK/O-QPSK Transmitter Employing Injection Locking for Direct Modulation

Low-Power, High-Data Rate 915 MHz Transceiver with Fully Passive Wake-Up Receiver for Biomedical Implants

Ultra low-power transceiver with novel FSK modulation technique and efficient FSK-to-ASK demodulation