Abstract:A simple surface treatment is reported, which can significantly increase the resistance of Mg to corrosion and corrosive wear by hammering Al powder‐covered surface of Mg with subsequent recovery treatment that is essential to achieve high degrees of nanocrystallization and structure integrity. Doubled hardness and two orders of magnitude lower corrosion rate can be obtained. Mg is abundant in the earth crust and very attractive as a base metal of lightweight alloys for the transportation industry due to its high strength‐to‐weight ratio. However, Mg is prone to corrosion, which largely limits its widespread applications. Here, a very simple surface treatment method is demonstrated for enhanced resistance to corrosion and corrosive wear by hammering Al powder‐covered surface of Mg with subsequent recovery treatment. Such treated surface is examined with X‐ray diffraction technique for information on phases, nanocrystallization, thickness, and coverage of the Al layer. Structure of the Al layer and lattice imperfections are analyzed with transmission electron microscopy. Electrochemical behavior, corrosion, and corrosive wear of the treated surface are evaluated. It is shown that the treated surface is nanocrystalline with significantly increased resistance to corrosion and corrosive wear. The effect of recovery heat treatment on microstructure of the Al layer is particularly characterized and demonstrated to be essential for achieving high degrees of nanocrystallization and structure integrity through eliminating lattice defects generated during the hammering process, leading to a desired nanocrystalline structure with high stability and superior properties. Molecular dynamics simulation is also performed to gain an insight into the underlying mechanism.

Surface Mechanical Treatment Suppressing the Strength-Corrosion Trade-off in an Al Mg Binary Alloy

A Simple Surface Treatment for Mg to Gain Enhanced Resistance to Corrosion and Corrosive Wear by Hammering Al Powder‐Covered Mg Substrate

Breaking the Trade off Between Corrosion Resistance and Fatigue Lifetime of the Coated Mg Alloy Through Cold Spraying Submicron-Grain Al Alloy Coatings

Grain-Refined Microstructure and Hard Surface Layer Produced by SMRGT Process for Improved Corrosion Behavior of Mg-3Al-1Zn Alloy

Acquiring Mg-Ag microalloying TiB 2 /Al-4.5Cu composite simultaneously with ultrahigh strength and ductility via optimized salt-metal reaction and multistage heat treatment

Manipulating Precipitation Through Thermomechanical Treatment to Control Corrosion Behavior of an Al–Cu–Mg Alloy

Microstructure and Mechanical Properties of Cast Al-Li-Mg Alloy: Role of Cu Addition and Heat Treatment

Tailoring the heterophase interfacial structures to improve both strength and ductility of Al-Li alloys by fine tuning major solute Mg

Microstructure and Tensile Properties of Al-Mg-Mn Alloy

Simultaneous enhancement in mechanical and corrosion properties of Al-Mg-Si alloys using machine learning

Effect of the Solid Solution and Aging Treatment on the Mechanical Properties and Microstructure of a Novel Al-Mg-Si Alloy

Microstructure Evolution of Modified Die-Cast AlSi10MnMg Alloy During Solution Treatment and Its Effect on Mechanical Properties

The Study on Heat Treatment Microstructure and Properties of Extruded Al-Mg-Si-Mn-Cr-Zr Alloy

Alloying effect of Mg on microstructure and mechanical properties at 300 °C of Al–5Cu–1Mn–0.5Ni heat-resistant alloy

Evading strength-corrosion tradeoff in Mg alloys via dense ultrafine twins

Correlation of Solidification Microstructure Refining Scale, Mg Composition and Heat Treatment Conditions with Mechanical Properties in Al-7Si-Mg Cast Aluminum Alloys

Effect of Al Addition and Heat Treatment on the Microstructures and Corrosion Resistance of Mg-Cu Alloys

Effects of Solution Treatment on Microstructure and Properties of Al-Mg-Si-Mn alloy

Achieving excellent strength-ductility in Al–Si–Cu–Mg cast alloy via effective work hardening

Simultaneously improving mechanical properties and corrosion resistance of as-cast AZ91 Mg alloy by ultrasonic surface rolling

Effect of Surface Mechanical Attrition Treatment on Biodegradable Mg-1Ca Alloy.