Abstract:Solution-processed organic photodetectors (OPDs) with organic layers on the order of nanometers have received tremendous attention due to their advantages of low cost, light weight, flexibility, and simple fabrication. The relatively high dark current, which is ascribed to the inherent properties of the bulk heterojunction structure, limits further promotion of OPDs. In this work, we performed a systematic investigation on transfer printing technology (TPT) based on different electron blocking layers (EBLs) and active layers. We demonstrated that the surface morphology of transfer-printed layers determines the performance of OPDs. Compared with PBDB-T and MEH-PPV, a smooth and compact P3HT layer can be obtained by TPT. The results demonstrated that in addition to the energy level or absorption spectrum of the material, the mechanical property that the surface remains smooth after transfer printing needs to be added as a selection criterion for transfer-printed EBLs. The dark current was reduced by approximately 2 orders of magnitude compared with that of the OPD without an EBL based on three different active layers (including fullerene and nonfullerene systems), while comparable photocurrents were obtained. Consequently, a similar responsivity (R), an improved specific detectivity (D*), and an enlarged linear dynamic range for OPDs were observed with the insertion of transfer-printed P3HT. Finally, the effect of transfer printing on the photoresponse time was investigated, and the results demonstrated that transfer-printed EBLs slightly increased the photoresponse time of OPDs.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsanm.1c02165.Molecular structures of used materials; UV–vis absorption spectra of EBLs; SEM and AFM images of transfer-printed EBLs before and after transfer printing; dark current density of OPDs with varied thickness of EBLs; EQE spectra; LDR of OPDs with or without transfer-printed EBL under 0 V bias; and cyclic photoresponse of OPDs with or without transfer-printed EBL under −5 V bias (PDF)This article has not yet been cited by other publications.

High-detectivity Organic Photodetectors with Double Bulk Heterojunction Enabled by Water Transfer Printing

Photovoltaic Mode Ultraviolet Organic Photodetectors with High On/Off Ratio and Fast Response

Water Transfer Printing of Multilayered Near‐Infrared Organic Photodetectors

Transfer-Printed Nanoscale Poly(3-hexylthiophene-2,5-diyl) Layers for Organic Photodetectors

Self‐Powered Organic Photodetectors with High Detectivity for Near Infrared Light Detection Enabled by Dark Current Reduction

Organic photodetectors with high detectivity for broadband detection covering UV-vis-NIR

Photo-crosslinking and layer-by-layer processed organic photodetectors with remarkably suppressed dark current

Efficient Charge Transfer in Narrowband Organic Photodiodes Based on Self-Assembled Heterojunction for Spectrally Selective Photodetection and Imaging

Enhanced Detectivity of Organic Photodetectors with a Non-Conjugated Polymer Additive

Mitigating Dark Current and Improving Charge Collection for High-Performance Near-Infrared Organic Photodiodes Via P-Doping Strategy

Solvent-Assisted Transfer-Printing of Silver Electrodes for High-Performance Organic Photodetectors

Nonfullerene-Based Organic Photodetectors for Ultrahigh Sensitivity Visible Light Detection

Organic Bulk–Heterojunction Blends with Vertical Phase Separation for Enhanced Organic Photodetector Performance

Highly Sensitive UV–Vis‐to‐Near‐Infrared Organic Photodetectors Employing ZnO: Polyethylenimine Ethoxylated Composite as Hole‐Blocking Layer

High-Detectivity Non-Fullerene Organic Photodetectors Enabled by a Cross-Linkable Electron Blocking Layer

High-Sensitivity Visible-Near Infrared Organic Photodetectors Based on Non-Fullerene Acceptors

Epidural Hematomas In Infancy And childhood: Report of 54 Cases

Organic Photodiodes with Thermally Reliable Dark Current and Excellent Detectivity Enabled by Low Donor Concentration.

High-responsivity, High-detectivity Photomultiplication Organic Photodetector Realized by a Metal-Insulator-Semiconductor Tunneling Junction

Dark Current In Broadband Perovskite‐Organic Heterojunction Photodetectors Controlled by Interfacial Energy Band Offset

Dual-Band Photomultiplication-Type Organic Photodetectors with Ultrahigh Signal-to-Noise Ratios