Abstract:Single cell trapping increasingly serves as a key manipulation technique in single cell analysis for many cutting-edge cell studies. Due to their inherent advantages, microfluidic devices have been widely used to enable single cell immobilization. To further improve the single cell trapping efficiency, this paper reports on a passive hydrodynamic microfluidic device based on the "least flow resistance path" principle with geometry optimized in line with corresponding cell types. Different from serpentine structure, the core trapping structure of the micro-device consists of a series of concatenated T and inverse T junction pairs which function as bypassing channels and trapping constrictions. This new device enhances the single cell trapping efficiency from three aspects: (1) there is no need to deploy very long or complicated channels to adjust flow resistance, thus saving space for each trapping unit; (2) the trapping works in a "deterministic" manner, thus saving a great deal of cell samples; and (3) the compact configuration allows shorter flowing path of cells in multiple channels, thus increasing the speed and throughput of cell trapping. The mathematical model of the design was proposed and optimization of associated key geometric parameters was conducted based on computational fluid dynamics (CFD) simulation. As a proof demonstration, two types of PDMS microfluidic devices were fabricated to trap HeLa and HEK-293T cells with relatively significant differences in cell sizes. Experimental results showed 100% cell trapping and 90% single cell trapping over 4 x 100 trap sites for these two cell types, respectively. The space saving is estimated to be 2-fold and the cell trapping speed enhancement to be 3-fold compared to previously reported devices. This device can be used for trapping various types of cells and expanded to trap cells in the order of tens of thousands on 1-cm(2) scale area, as a promising tool to pattern large-scale single cells on specific substrates and facilitate on-chip cellular assay at the single cell level. (C) 2015 AIP Publishing LLC.

Trapping and releasing of single microparticles and cells in a microfluidic chip.

Design of Acoustofluidic Device for Localized Trapping

Trapping of a Single Microparticle using AC Dielectrophoresis Forces in a Microfluidic Chip

A microfluidic device enabling high-efficiency single cell trapping.

A Microfluidic Device Enabling Deterministic Single Cell Trapping and Release.

Large-Scale Single Particle and Cell Trapping Based on Rotating Electric Field Induced-Charge Electroosmosis

High‐Efficient Microfluidic Single‐Cell Trapping and Arraying with Absolute Sequential Capture and High Success Rate of Perfect Capture

Trapping and Driving Individual Charged Micro-particles in Fluid with an Electrostatic Device

High-Throughput Cell Trapping in the Dentate Spiral Microfluidic Channel

A Microfluidic Chip With Double-Slit Arrays For Enhanced Capture Of Single Cells

High-Throughput Separation, Trapping, and Manipulation of Single Cells and Particles by Combined Dielectrophoresis at a Bipolar Electrode Array.

Cell Trapping Utilizing Insulator-based Dielectrophoresis in The Open-Top Microchannels

Microfluidic systems for hydrodynamic trapping of cells and clusters

Parameter Screening in Microfluidics Based Hydrodynamic Single-Cell Trapping

Study of Cell-Trap Microfluidic Chip for Platinum Drugs Treating Cancer Cell Tests

Microfluidic-based Single Cell Trapping Using a Combination of Stagnation Point Flow and Physical Barrier

High-throughput particle manipulation by hydrodynamic, electrokinetic, and dielectrophoretic effects in an integrated microfluidic chip.

Dielectrophoretic Traps for Efficient Bead and Cell Trapping and Formation of Aggregates of Controlled Size and Composition

Fabrication and Package of Microfluidic Dielectrophoretic Chip for Trapping Two Particles

Multiplexing Microelectrodes for Dielectrophoretic Manipulation and Electrical Impedance Measurement of Single Particles and Cells in a Microfluidic Device

Dynamic trapping and high-throughput patterning of cells using pneumatic microstructures in an integrated microfluidic device.