Abstract:Due to the extremely low Reynolds number, the mixing of substances in laminar flow within microfluidic channels primarily relies on slow intermolecular diffusion, whereas various rapid reaction and detection requirements in lab-on-a-chip applications often necessitate the efficient mixing of fluids within short distances. This paper presents a magnetic pillar-shaped particle fabrication device capable of producing particles with planar shapes, which are then utilized to achieve the rapid mixing of multiple fluids within microchannels. During the particle fabrication process, a degassed PDMS chip provides self-priming capabilities, drawing in a UV-curable adhesive-containing magnetic powder and distributing it into distinct microwell structures. Subsequently, an external magnetic field is applied, and the chip is exposed to UV light, enabling the mass production of particles with specific magnetic properties through photo-curing. Without the need for external pumping, this chip-based device can fabricate hundreds of magnetic particles in less than 10 min. In contrast to most particle fabrication methods, the degassed PDMS approach enables self-priming and precise dispensing, allowing for precise control over particle shape and size. The fabricated dual-layer magnetic particles, featuring fan-shaped blades and disk-like structures, are placed within micromixing channels. By manipulating the magnetic field, the particles are driven into motion, altering the flow patterns to achieve fluid mixing. Under conditions where the Reynolds number in the chip ranges from 0.1 to 0.9, the mixing index for substances in aqueous solutions exceeds 0.9. In addition, experimental analyses of mixing efficiency for fluids with different viscosities, including 25 wt% and 50 wt% glycerol, reveal mixing indices exceeding 0.85, demonstrating the broad applicability of micromixers based on the rapid rotation of magnetic particles.

Fabrication and Package of Microfluidic Dielectrophoretic Chip for Trapping Two Particles

Design of A Microfluidic Dielectrophoretic Chip for Trapping Two Particles

Fabrication of Dielectrophoretic Microfluidic Chips Using a Facile Screen-Printing Technique for Microparticle Trapping

Trapping of a Single Microparticle using AC Dielectrophoresis Forces in a Microfluidic Chip

Design of Acoustofluidic Device for Localized Trapping

An Integrated Dielectrophoresis-Active Hydrophoretic Microchip for Continuous Particle Filtration and Separation

A 3-D Microelectrode System For Dielectrophoretic Manipulation Of Microparticles

Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Concentration of Proteins

Screen-printed microfluidic dielectrophoresis chip for cell separation

Dielectrophoretic Microfluidic Chip with 3D Vertical Side-Wall Electrodes

Trapping and Driving Individual Charged Micro-particles in Fluid with an Electrostatic Device

Fabricating a dielectrophoretic microfluidic device using 3D-printed moulds and silver conductive paint

A Simplified Microfluidic Device for Particle Separation with Two Consecutive Steps: Induced Charge Electro-osmotic Prefocusing and Dielectrophoretic Separation.

A Complete Design Flow of Dielectrophoretic Chip

Fabrication of Patterned Magnetic Particles in Microchannels and Their Application in Micromixers

Cell Trapping Utilizing Insulator-based Dielectrophoresis in The Open-Top Microchannels

Fabrication and Integration of Microscale Permanent Magnets for Particle Separation in Microfluidics

A stepwise multi-stage continuous dielectrophoresis separation microfluidic chip with microfilter structures

Dielectrophoretic Medium Exchange Around Droplets for On-Chip Fabrication of Layer-by-layer Microcapsules

Design of a high-throughput integrated microfluidic chip combining micromixing and particle sorting functions

Continuous Separation of Multiple Size Microparticles Using Alternating Current Dielectrophoresis in Microfluidic Device with Acupuncture Needle Electrodes