Abstract:Single cell trapping increasingly serves as a key manipulation technique in single cell analysis for many cutting-edge cell studies. Due to their inherent advantages, microfluidic devices have been widely used to enable single cell immobilization. To further improve the single cell trapping efficiency, this paper reports on a passive hydrodynamic microfluidic device based on the "least flow resistance path" principle with geometry optimized in line with corresponding cell types. Different from serpentine structure, the core trapping structure of the micro-device consists of a series of concatenated T and inverse T junction pairs which function as bypassing channels and trapping constrictions. This new device enhances the single cell trapping efficiency from three aspects: (1) there is no need to deploy very long or complicated channels to adjust flow resistance, thus saving space for each trapping unit; (2) the trapping works in a "deterministic" manner, thus saving a great deal of cell samples; and (3) the compact configuration allows shorter flowing path of cells in multiple channels, thus increasing the speed and throughput of cell trapping. The mathematical model of the design was proposed and optimization of associated key geometric parameters was conducted based on computational fluid dynamics (CFD) simulation. As a proof demonstration, two types of PDMS microfluidic devices were fabricated to trap HeLa and HEK-293T cells with relatively significant differences in cell sizes. Experimental results showed 100% cell trapping and 90% single cell trapping over 4 x 100 trap sites for these two cell types, respectively. The space saving is estimated to be 2-fold and the cell trapping speed enhancement to be 3-fold compared to previously reported devices. This device can be used for trapping various types of cells and expanded to trap cells in the order of tens of thousands on 1-cm(2) scale area, as a promising tool to pattern large-scale single cells on specific substrates and facilitate on-chip cellular assay at the single cell level. (C) 2015 AIP Publishing LLC.

Monoclonal antibodies against leukemic hairy cells that also recognize T-cell activation antigens.

Design of Acoustofluidic Device for Localized Trapping

A microfluidic device enabling high-efficiency single cell trapping.

Cell Encapsules with Tunable Transport and Mechanical Properties

Trapping of a Single Microparticle using AC Dielectrophoresis Forces in a Microfluidic Chip

A Microfluidic Device Enabling Deterministic Single Cell Trapping and Release.

Enhancing the capture efficiency and homogeneity of single-layer flow-through trapping microfluidic devices using oblique hydrodynamic streams

A fluidic circuit based, high-efficiency and large-scale single cell trap

Time Sequential Single-Cell Patterning with High Efficiency and High Density.

Cell Trapping Utilizing Insulator-based Dielectrophoresis in The Open-Top Microchannels

High‐Efficient Microfluidic Single‐Cell Trapping and Arraying with Absolute Sequential Capture and High Success Rate of Perfect Capture

Using lateral dispersion to optimise microfluidic trap array efficiency

High-throughput microfluidic single-cell trapping arrays for biomolecular and imaging analysis

Hybrid dielectrophoretic-optical trap for microparticles in aqueous suspension

A Novel and Robust Single-cell Trapping Method on Digital Microfluidics

Single Red Blood Cell Hydrodynamic Traps via the Generative Design

Tunable membrane-less dielectrophoretic microfiltration by crossing interdigitated electrodes

Flexible Trapping and Manipulation of Single Cells on a Chip by Modulating Phases and Amplitudes of Electrical Signals Applied Onto Microelectrodes.

[The relevance of chest X-rays and respiratory function tests to the assessment of occupational hazards in asbestos factory workers (author's transl)].

Trapping and Driving Individual Charged Micro-particles in Fluid with an Electrostatic Device

Method for trapping and manipulating nanoscale objects in solution