Abstract:The addition of rare earth (RE) elements in magnesium alloys may significantly enhance the ductility of magnesium alloys, which is generally attributed to the decrease of stacking fault energy, the reduced critical resolved shear stress (CRSS) differences among different deformation modes and the weakening of basal texture. Rare earth elements also change the misorientation between adjacent grains of magnesium alloy, whose effects on the deformation behavior and thus the ductility of magnesium alloy were not emphasized before. In this work, ex-situ high-resolution digital image correlation (HR-DIC) coupled with electron backscatter diffraction (EBSD) was used to reveal the effect of the misorientation on the deformation behavior of a Mg-Y binary alloy from the perspective of local strain. It is shown that the heterogeneity of local strain is largely dependent on the misorientation between adjacent grains. For the intergranular deformation, three scenarios are observed, namely strain transfer, strain concentration and suppressed deformation, which mainly occurs at low misorientation, moderate misorientation and high misorientation, respectively. In addition, much more non-basal slip is found to be activated near the grain boundaries with moderate misorientation angles due to the high geometric compatibility factor (m’B-Pr/Py), which is favorable for the intergranular deformation compatibility, thus reducing the strain concentration near grain boundaries and achieving high ductility. For the intragranular deformation, a wide range of misorientation between adjacent grains in the Mg-Y alloy causes multiple basal slip systems to be activated within a grain, which also facilitates work hardening, thus contributing to improving ductility. Therefore, tailoring the misorientation between adjacent grains may be an effective way to improve the ductility of magnesium alloys.

Orientation Behavior in TRC-ZA21 Magnesium Alloy with Fine Grain Size During Nano-Indentation Process

Orientation dependence of intracrystalline and grain boundary deformation behavior in Mg-2Y using nanoindentation and CPFEM

Grain Rotation In Plastic Deformation

Coordinated grain boundary deformation governed nanograin annihilation in shear cycling

Inclination-governed Deformation of Dislocation-Type Grain Boundaries

The effect of grain orientation on nanoindentation behavior of model austenitic alloy Fe-20Cr-25Ni

In-situ Study of the Effect of Grain Boundary Misorientation on Plastic Deformation of Inconel 718 at High Temperature

The effect of grain size on deformation modes and deformation heterogeneity in a rolled Mg-Zn-Ca alloy

The synergistic effect of grain boundary and grain orientation on micro-mechanical properties of austenitic stainless steel

The effects of orientation control via tension-compression on microstructural evolution and mechanical behavior of AZ31 Mg alloy sheet

The Effects of Grain Boundary Misorientation on the Mechanical Properties and Mechanism of Plastic Deformation of Ni/Ni3Al: A Molecular Dynamics Study

Unveiling orientation dependence of anisotropic plasticity in polycrystalline copper by nanoindentation

Grain size and orientation affected deformation inhomogeneity and local damage of hot-deformed Al-Zn-Mg alloy

Effect of Grain Orientation on Indentation Induced Creep in Pure Zinc

Grain size gradient effect on grain boundary mediated deformation of nano-grained metals

Revealing the effect of misorientation on the deformation behavior of a Mg-Y alloy from the perspective of local strain

Orientation factor analysis of deformation mechanisms under special processing techniques in AZ31 magnesium alloys

Shear-induced directional grain growth in ag nanocrystalline films under nanoindentation

Neighbor-Affected Orientation Rotation in the Grain Boundary Region

Multi-scale Simulation of the Deformation in Nano-Indentation under Different Crystal Orientations

The Grain Size and Orientation Dependence of Geometrically Necessary Dislocations in Polycrystalline Aluminum During Monotonic Deformation: Relationship to Mechanical Behavior