Abstract:This article studies a scalable control method for multizone heating, ventilation, and air-conditioning (HVAC) systems to optimize the energy cost for maintaining thermal comfort (TC) and indoor air quality (IAQ) (represented by CO2) simultaneously. This problem is computationally challenging due to the complex system dynamics, various spatial and temporal couplings, as well as multiple control variables to be coordinated. To address the challenges, we propose a two-level distributed method (TLDM) with an upper level and lower level control integrated. The upper level computes zone mass flow rates for maintaining zone TC with minimal energy cost, and then, the lower level strategically regulates zone mass flow rates and the ventilation rate to achieve IAQ while preserving the near energy-saving performance of upper level. As both the upper and the lower level computation are deployed in a distributed manner, the proposed method is scalable and computationally efficient. The near-optimal performance of the method in energy cost saving is demonstrated through comparison with the centralized method. In addition, the comparisons with the existing distributed method show that our method can provide IAQ with only little increase of energy cost, while the latter fails. Moreover, we demonstrate that our method outperforms the demand-controlled ventilation (DCVs) strategies for IAQ management with about 8%–10% energy cost reduction. Note to Practitioners: The high portion of building energy consumption has motivated the energy saving for heating, ventilation, and air-conditioning (HVAC) systems. Concurrently, the living standards for indoor environment are rising among the occupants. Nevertheless, the status quo on improving building energy efficiency has mostly focused on maintaining thermal comfort (such as temperature), and the indoor air quality (IAQ) (usually represented by CO2 level) has been seldom incorporated. In our previous work with the similar setting, we observed that the CO2 levels will surge beyond tolerance during the high occupancy periods if only thermal comfort (TC) is considered for HVAC control. This deduces the IAQ and TC should be jointly considered while pursuing the energy cost saving target and thus studied in this article. This task is computationally cumbersome due to the complex system dynamics (thermal and CO2) and tight correlations among the different control components (variable air volume and fresh air damper). To cope with these challenges, this work develops a two-level distributed computation paradigm for HVAC systems based on problem structures. Specifically, the upper level control (ULC) first calculates zone mass flow rates for maintaining comfortable zone temperature with minimal energy cost, and then, the lower level strategically regulates the computed zone mass flow rates as well as ventilation rate to satisfy IAQ while preserving the near energy-saving performance of the ULC. As both the upper and lower level calculations can be implemented in a distributed manner, the proposed method is scalable to large multizone deployment. The method's performance both in maintaining comfort (i.e., TC and IAQ) and energy cost saving is demonstrated via simulations in comparisons with the centralized method, the distributed token-based scheduling strategy, and the demand-controlled ventilation strategies.

Building Temperature and Humidity Adaptive Control for a Multi-Zone HVAC System Using Hybrid Modeling Method

Model-based Fault Detection and Diagnosis for HVAC.

A Control-Oriented Semi-Physical Model for A Direct Expansion Air Conditioning System

A Multiple Model Approach for Predictive Control of Indoor Thermal Environment with High Resolution

A novel hybrid steady-state model based controller for simultaneous indoor air temperature and humidity control

Multi-Zone Building Temperature Control and Energy Efficiency Using Autonomous Hierarchical Control Strategy

Distributed Adaptive HVAC Control for Multi-Zone Buildings

Humidity-Aware Model Predictive Control for Residential Air Conditioning: A Field Study

Comfort-Aware Building Climate Control Using Distributed-Parameter Models

Hybrid Ventilation for Multi-Zone Buildings - Development of Optimal Control Strategies through Experiments and Dynamic Modelling

Modeling and Controlling of Temperature and Humidity in Building Heating, Ventilating, and Air Conditioning System Using Model Predictive Control

HVAC Energy Cost Optimization for a Multizone Building via a Decentralized Approach

Investigating the flexibility of a novel multi-zone air heating and ventilation system using model predictive control

Distributed Control of Multizone HVAC Systems Considering Indoor Air Quality

Model predictive control of indoor thermal environment conditioned by a direct expansion air conditioning system

Distributed control of multi-zone commercial buildings for demand response

Computer vision-based smart HVAC control system for university classroom in a subtropical climate

Enhancing HVAC multivariable system performance through hybrid modeling and direct Nyquist Array control

Whole-Building Heat, Air, and Moisture Transfer Modeling for Residential Buildings in Different Climates

Model predictive control with adaptive machine-learning-based model for building energy efficiency and comfort optimization

Optimal Control Strategy for Building HVAC Systems: Satisfying Flexible Demand Response with Different Value-Based Selection