Abstract:Controlling indoor humidity at an appropriate level is very important since this affects occupants' thermal comfort and indoor air quality (IAQ). The paper presents an investigation on developing a multi-input multi-output (MIMO) control strategy for simultaneously controlling the indoor air temperature and humidity by varying the speeds of both compressor and supply fan in an experimental DX A/C system. The MIMO-based controller was designed based on the linearized dynamic model of the experimental DX A/C system. The Linear Quadratic Gaussian (LQG) technique was used in designing the MIMO-based controller. The controllability tests with respect to both the disturbance rejection capability and the command following capability were carried out to assess the control performance of MIMO controller. The results of disturbance rejection capability test showed that the MIMO control strategy can effectively maintain the indoor air temperature and humidity to their respective settings after an unmeasured heat load disturbance was imposed by simultaneously varying speeds of both the compressor and the supply fan of the DX A/C system. Furthermore, in the command following capability test for indoor air temperature, the test results showed that the indoor air temperature can be controlled to its new setting while indoor humidity remained unchanged. Similar test results were also observed in the command following capability test for indoor humidity. Therefore, the MIMO controller developed can effectively control indoor air temperature and humidity simultaneously by varying compressor speed and supply fan speed of the DX A/C system. Compared to the previous related studies using conventional on–off control method or single-input single-output (SISO) control strategy, which can only effectively control either air temperature or relative humidity, the MIMO controller can simultaneously control the indoor air temperature and humidity with adequate control sensitivity and accuracy. The application of MIMO control strategy developed can be extended to other HVAC systems in the future to improve their operating performance and energy efficiency.

A novel hybrid steady-state model based controller for simultaneous indoor air temperature and humidity control

A Control-Oriented Semi-Physical Model for A Direct Expansion Air Conditioning System

A Multiple Model Approach for Predictive Control of Indoor Thermal Environment with High Resolution

A Cfd-Based Test Method For Control Of Indoor Environment In Air-Conditioned Rooms

Multivariable control of indoor air temperature and humidity in a direct expansion (DX) air conditioning (A/C) system

Model predictive control of indoor thermal environment conditioned by a direct expansion air conditioning system

Optimum Control Strategy and Performance Simulation of a Constant Temperature and Humidity Air-conditioning System

Feedforward decoupling control of indoor temperature and humidity using a single direct expansion air conditioning unit

Performance Study of a Constant Temperature and Humidity Air-Conditioning System with Temperature and Humidity Independent Control Device

Application of self-adaptive fuzzy PI control in the air-conditioning system

A hybrid dehumidifier model for real-time performance monitoring, control and optimization in liquid desiccant dehumidification system

A Museum Storeroom Air-Conditioning System Employing the Temperature and Humidity Independent Control Device in the Cooling Coil

Enhancing HVAC multivariable system performance through hybrid modeling and direct Nyquist Array control

Automatic control of constant temperature and humidity in building air conditioning systems based on frequency domain analysis

Modeling and Controlling of Temperature and Humidity in Building Heating, Ventilating, and Air Conditioning System Using Model Predictive Control

An adaptive controller based dynamic simulation of household air-conditioner with indirect evaporative cooler as dedicated outdoor air system

Design of A Fuzzy Controller for the Active Chilled Beam System

The monitored control design of the central air-conditioning system

Steady-State Performance Prediction for a Variable Speed Direct Expansion Air Conditioning System Using a White-Box Based Modeling Approach

Modeling and Control for Greenhouse Temperature System Based on Hybrid Automata

Joint Optimization for Temperature and Humidity Independent Control System Based on Multi-Agent Reinforcement Learning with Cooperative Mechanisms