Abstract:Selective hydrogenation of fatty esters into high-value-added fatty alcohols over non-noble-metal (e.g., Ni and Co) catalysts is highly desirable for the utilization of natural oils. Although these catalysts offer high hydrogenation activity and are reasonably economical, they suffer from low hydrodeoxygenation activity at low temperatures while promoting certain side reactions (e.g., C–C bond hydrogenolysis and decarbonylation/decarboxylation) at high temperatures, which are undesirable for the production of fatty alcohols. In this study, we tested and optimized the performance of Ni metal catalysts with various metal–oxide modifiers and supports for the selective hydrogenation of methyl palmitate to cetyl alcohol. The most efficient catalytic system (Ni-VOx/TiO2, Ni:V ≈ 1:1, mol/mol) achieved almost quantitative conversion with 90% selectivity for cetyl alcohol under mild conditions (220 °C and 4.0 MPa of H2), which was ascribed to the ternary synergistic action of Ni, oxygen vacancies, and Lewis acid sites. The catalytic synergy of the Ni metal and oxygen vacancies (formed by the reduction of TiO2) was primarily responsible for C–O bond cleavage in methyl palmitate to form palmitic aldehyde as the main intermediate. Furthermore, the V species engaged in metal–Lewis acid cooperation at the metal–oxide interface to efficiently promote the C═O bond hydrogenation of palmitic aldehyde and suppress the undesired C–C bond cleavage, thereby facilitating the highly selective production of cetyl alcohol. The obtained insights into the active phase of Ni-VOx/TiO2 catalysts are expected to facilitate the development of highly efficient catalysts for the selective hydrogenation of fatty esters and other biomass-derived compounds containing C═O/C–O groups.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c02181?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c02181</a>.FTIR testing procedure; GC testing procedure; (Figure S1) (A) recyclability of the Ni-VOx/TiO2 (1:1) catalyst and (B) ICP-MS of the used catalyst; (Figure S2) XRD patterns of calcined catalysts; (Figure S3) H2-TPR profile of calcined catalysts; (Table S1) compositions of the catalysts reduced in H2 at 500 °C determined by ICP; (Table S2) saturation magnetization (Ms), remanent magnetization (Mr), and coercivity (Hc) values for different catalysts (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02181/suppl_file/sc1c02181_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High-efficient production of fatty alcohol via hydrogenation of fatty acid over Cu-NbOx/SBA-15 catalyst

Catalytic in Situ Hydrogenation of Fatty Acids into Fatty Alcohols over Cu-Based Catalysts with Methanol in Hydrothermal Media

Efficient and Stable Cu-Ni/ZrO2 Catalysts for in Situ Hydrogenation and Deoxygenation of Oleic Acid into Heptadecane Using Methanol As a Hydrogen Donor

Bifunctional CuNi/CoOx catalyst for mild-temperature in situ hydrodeoxygenation of fatty acids to alkanes using isopropanol as hydrogen source

Preparation of Metal-Acid Bifunctional Catalyst Ni/Zsm-22 for Palmitic Acid Catalytic Deoxygenation

Selective Hydrogenation of Methyl Palmitate to Cetyl Alcohol via Ternary Synergistic Catalysis of Ni, Oxygen Vacancies, and Lewis Acid Sites under Mild Reaction Conditions

Selective hydrogenation of oleic acid over Flower-like Ni-Fe/SiO2-ZrO2 catalyst to produce fatty alcohol: Effect of SiO2

Hydrogenation of fatty acids to fatty alcohols over Ni 3 Fe nanoparticles anchored on TiO 2 crystal catalyst: Metal support interaction and mechanism investigation

Pd–Ni–Fe Nanoparticles Supported on UiO-66 for Selective Hydrogenation of Fatty Acid Methyl Esters to Alcohols

Bimetallic Ni and Mo Nitride as an Efficient Catalyst for Hydrodeoxygenation of Palmitic Acid

Alcohol production from fatty acids via Ni 3 Fe/Rutile: Revealing the role of oxygen vacancy and metal-support electronic density characteristics

Preparation of Reduced Ni-Nb-O Composite Hydrogenation Catalysts for Highly Selective Conversion of Free Fatty Acids to N-Alkanes

Ni nanoparticle coupled surface oxygen vacancies for efficient synergistic conversion of palmitic acid into alkanes

Investigation on the Aqueous-Phase Hydrogenation of Bio-Oil for Saturated Alcohols Production over Ni-B Amorphous Catalysts

Highly efficient and selective hydrogenation of furfural to furfuryl alcohol and cyclopentanone over Cu-Ni bimetallic Catalysts: The crucial role of CuNi alloys and Cu + species

Highly Efficient Dehydrogenation of Primary Aliphatic Alcohols Catalyzed by Cu Nanoparticles Dispersed on Rod-Shaped La2O2CO3

Ternary Cobalt–Copper–Niobium Catalysts for the Selective CO Hydrogenation to Higher Alcohols

Hydrodeoxygenation of Methyl Palmitate over Supported Ni Catalysts for Diesel-like Fuel Production

Upgrading of Palmitic Acid and Hexadecanamide over Co-based Catalysts: Effect of Support (sio2, Γ-Al2o3 and H-ZSM-22)

Carbon-coated Ni-Co alloy catalysts: preparation and performance for in-situ aqueous phase hydrodeoxygenation of methyl palmitate to hydrocarbons using methanol as the hydrogen donor

Highly selective and efficient hydrogenation of fatty acids to alcohols using NiMo@C catalyst