Abstract:Selective hydrogenation of fatty esters into high-value-added fatty alcohols over non-noble-metal (e.g., Ni and Co) catalysts is highly desirable for the utilization of natural oils. Although these catalysts offer high hydrogenation activity and are reasonably economical, they suffer from low hydrodeoxygenation activity at low temperatures while promoting certain side reactions (e.g., C–C bond hydrogenolysis and decarbonylation/decarboxylation) at high temperatures, which are undesirable for the production of fatty alcohols. In this study, we tested and optimized the performance of Ni metal catalysts with various metal–oxide modifiers and supports for the selective hydrogenation of methyl palmitate to cetyl alcohol. The most efficient catalytic system (Ni-VOx/TiO2, Ni:V ≈ 1:1, mol/mol) achieved almost quantitative conversion with 90% selectivity for cetyl alcohol under mild conditions (220 °C and 4.0 MPa of H2), which was ascribed to the ternary synergistic action of Ni, oxygen vacancies, and Lewis acid sites. The catalytic synergy of the Ni metal and oxygen vacancies (formed by the reduction of TiO2) was primarily responsible for C–O bond cleavage in methyl palmitate to form palmitic aldehyde as the main intermediate. Furthermore, the V species engaged in metal–Lewis acid cooperation at the metal–oxide interface to efficiently promote the C═O bond hydrogenation of palmitic aldehyde and suppress the undesired C–C bond cleavage, thereby facilitating the highly selective production of cetyl alcohol. The obtained insights into the active phase of Ni-VOx/TiO2 catalysts are expected to facilitate the development of highly efficient catalysts for the selective hydrogenation of fatty esters and other biomass-derived compounds containing C═O/C–O groups.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c02181?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c02181</a>.FTIR testing procedure; GC testing procedure; (Figure S1) (A) recyclability of the Ni-VOx/TiO2 (1:1) catalyst and (B) ICP-MS of the used catalyst; (Figure S2) XRD patterns of calcined catalysts; (Figure S3) H2-TPR profile of calcined catalysts; (Table S1) compositions of the catalysts reduced in H2 at 500 °C determined by ICP; (Table S2) saturation magnetization (Ms), remanent magnetization (Mr), and coercivity (Hc) values for different catalysts (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02181/suppl_file/sc1c02181_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Pd–Ni–Fe Nanoparticles Supported on UiO-66 for Selective Hydrogenation of Fatty Acid Methyl Esters to Alcohols

Efficient and Stable Cu-Ni/ZrO2 Catalysts for in Situ Hydrogenation and Deoxygenation of Oleic Acid into Heptadecane Using Methanol As a Hydrogen Donor

Multifunctional Pd@UiO-66 Catalysts for Continuous Catalytic Upgrading of Ethanol to n-Butanol

CO2‐assisted Controllable Synthesis of PdNi Nanoalloys for Highly Selective Hydrogenation of Biomass‐derived 5‐Hydroxymethylfurfural

Selective hydrogenation of furfural and its derivative over bimetallic NiFe-based catalysts: Understanding the synergy between Ni sites and Ni–Fe alloy

Highly selective and efficient hydrogenation of fatty acids to alcohols using NiMo@C catalyst

Hydrogenation of fatty acids to fatty alcohols over Ni 3 Fe nanoparticles anchored on TiO 2 crystal catalyst: Metal support interaction and mechanism investigation

Selective Hydrogenation of Furfural over Pt Based and Pd Based Bimetallic Catalysts Supported on Modified Multiwalled Carbon Nanotubes (MWNT)

Hydrodeoxygenation of Methyl Palmitate over Supported Ni Catalysts for Diesel-like Fuel Production

Selective Hydrogenation of Methyl Palmitate to Cetyl Alcohol via Ternary Synergistic Catalysis of Ni, Oxygen Vacancies, and Lewis Acid Sites under Mild Reaction Conditions

Cu-Based Nanoparticles as Catalysts for Selective Hydrogenation of Biomass-Derived 5-Hydroxymethylfurfural to 1,2-Hexanediol

Enhancement of fatty acids hydrodeoxygenation selectivity to diesel-range alkanes over the supported Ni-MoOx catalyst and elucidation of the active phase

In Situ Hydrogenation of Methyl Palmitate to Hexadecanol on TiO2- and ZrO2-Supported Ni-In Catalysts in the Aqueous Phase Using Methanol As a Hydrogen Donor

Hollow UiO‐66‐NH2 encapsulated Pd catalysts for highly selective hydrogenation of furfural to furfuryl alcohol

Synergistic effect of bimetallic Fe-Ni supported on hexagonal mesoporous silica for production of hydrocarbon-like biofuels via deoxygenation under hydrogen-free condition

Differentiation of Pt−Fe and Pt−Ni 3 Surface Catalytic Mechanisms towards Contrasting Products in Chemoselective Hydrogenation of α,β‐Unsaturated Aldehydes

Heterogeneous Ni and MoOx co-loaded CeO2 catalyst for the hydrogenation of fatty acids to fatty alcohols under mild reaction conditions

Nanoporous Ni3P evolutionarily structured onto a Ni-foam for highly selective hydrogenation of dimethyl oxalate to methyl glycolate.

Importance of oxyphilic FeNi alloy in NiFeAl catalysts for selective conversion of biomass-derived 5-hydroxymethylfurfural to 2,5-dimethylfuran

Enhanced Fatty Acid Photodecarboxylation over Bimetallic Au-Pd Core-Shell Nanoparticles Deposited on TiO2

Hierarchically Nitrogen‐doped Porous Carbon‐Supported Non‐noble Metal Nanoparticles for Promoting the Selective Hydrogenation of Furfural