Abstract:Precise size control and general synthesis of ultrafine noble metal-based catalysts are very important in electrochemical energy conversion technologies. Herein, we develop the ultrafine MCu (M = Pt, Au, and Pd) alloy nanoparticles anchored on the porous N-doped carbon nanofibers (MCu/p-NCNFs) by the electroless deposition method. The as-prepared MCu alloy nanoparticles possess ultrafine particles sizes (<10 nm) and are uniformly anchored on p-NCNFs, which are derived from electrospun polyacrylonitrile (PAN) nanofibers. Owing to the desired composition and structure, the as-prepared PtCu/p-NCNFs with an ultrafine alloy size (≈3.5 nm) exhibits significantly enhanced electrocatalytic activity and stability toward methanol electrooxidation as well as the outstanding CO antipoisoning ability. This work offers a new general strategy for the fabrication of ultrafine alloy nanoparticles on a porous nitrogen-doped carbon support as highly efficient electrocatalysts for energy-related applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.jpcc.0c03460?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.jpcc.0c03460</a>.Schematic illustration for the fabrication of MCu/p-NCNFs; SEM and TEM images with low magnification of as-prepared Cu/p-NCNFs; TEM image with high magnification of as-prepared Cu/p-NCNFs; SEM image with high magnification of as-prepared PtCu/p-NCNFs; CVs of the p-NCNFs in 0.5 M H2SO4 aqueous solution at 10 mV s–1; TEM image and size distribution of PtCu NPs; TEM images of PtCu/p-NCNFs synthesized using 3.5, 5, and 7 mM H2PtCl6 aqueous solution; XRD patterns of PtCu/p-NCNFs synthesized using different concentrations of H2PtCl6 aqueous solution and different time of electroless deposition; TEM images of PtCu/p-NCNFs synthesized by 5, 20, and 60 min electroless deposition; schematic illustration of metal nanoparticle deposition on carbon nanotubes via the substrate-enhanced electroless deposition process in previous studies; N2 adsorption–desorption isotherm and pore size distribution curve, survey XPS spectra, and C 1s XPS spectra of Cu/p-NCNFs and PtCu/p-NCNFs; CV curves in 0.5 M H2SO4 + 1 M CH3OH at 50 mV s–1; CV curves of PtCu/p-NCNFs and commercial Pt/C from the 1st to 200th cycle; TEM images of the PtCu/p-NCNFs and PtCu NPs after 200 cycles; histograms for size distribution of alloy nanoparticles in as-prepared PdCu/p-NCNFs and AuCu/p-NCNFs; EDS spectra of PdCu/p-NCNFs and AuCu/p-NCNFs; comparisons of the experimental parameters of as-reported research studies that use the SEED method to fabricate the MNPs/C system; and composition of different PtCu/p-NCNFs samples based on the ICP-AES analysis (<a class="ext-link" href="/doi/suppl/10.1021/acs.jpcc.0c03460/suppl_file/jp0c03460_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Refinement of Nanoporous Copper By Dealloying MgCuY Amorphous Alloys in Organic and Sulfuric Acids

Fabrication and Functionalization of Tunable Nanoporous Copper Structures by Hybrid Laser Deposition and Chemical Dealloying

Preparation of nanoporous copper foil by chemical dealloying from electro-deposited CuZn alloy

Liquid Metal-Enabled Tunable Synthesis of Nanoporous Polycrystalline Copper for Selective CO2-to-Formate Electrochemical Conversion

Refinement of Nanoporous Copper by Dealloying Al-Cu Alloy in NaOH Solution Containing Sodium Dodecyl Sulfate

Controlled Dealloying of Alloy Nanoparticles Toward Optimization of Electrocatalysis on Spongy Metallic Nanoframes.

General Preparation for Pt-Based Alloy Nanoporous Nanoparticles As Potential Nanocatalysts

Dealloying to Nanoporous Au/Pt Alloys and Their Structure Sensitive Electrocatalytic Properties.

Nanostructural features in nanoporous copper coatings fabricated by laser deposition

Synthesis and application of Cu(OH)2 nanowires on nanoporous copper prepared by dealloying Ti50Cu50 and Ti25Zr25Cu50 amorphous alloys

Porosity evolution and oxide formation in bulk nanoporous copper dealloyed from a copper-manganese alloy studied by in situ resistometry

Refinement of Nanoporous Cu by Polyvinylpyrrolidone and Photodegradation of Methyl Orange by Cu2O Nanowires and Nanoporous Cu Photocatalysts

Fabrication, Microstructure, and Properties of Nanoporous Pd, Ni, and Their Alloys by Dealloying

A Study of Electroplated Nanoporous Copper Using Aberration-Corrected Transmission Electron Microscopy

Investigation on the Electrochemical Catalysis Properties of Ni-decorated Nanoporous Copper Formed by Hybrid Laser Deposition

General Synthesis of Ultrafine Cu-Based Alloy Nanoparticles Anchored on Porous N-Doped Carbon Nanofibers for Enhanced Electrocatalytic Performance

Length-Scale Modulated and Electrocatalytic Activity Enhanced Nanoporous Gold by Doping

Dealloying to Nanoporous Silver and Its Implementation As a Template Material for Construction of Nanotubular Mesoporous Bimetallic Nanostructures

Magical Oxygen: Tuning Cu&Ag Nanoporous Membrane into Nanoporous (cu&ag)@ag Core-Shell Alloy

Alloying/dealloying mechanisms, microstructural modulation and mechanical properties of nanoporous silver via a liquid metal-assisted alloying/dealloying strategy

Nanoporous high-entropy alloys for highly stable and efficient catalysts