Abstract:Background: Neural stimulation is an important method used to activate or inhibit action potentials of the neuronal anatomical targets found in the brain, central nerve and peripheral nerve. The neural stimulator system produces biphasic pulses that deliver balanced charge into tissue from single or multichannel electrodes. The timing and amplitude of these biphasic pulses are precisely controlled by the neural stimulator software or imbedded algorithms. Amplitude mismatch between the anodic current and cathodic current of the biphasic pulse will cause permanently damage for the neural tissues. The main goal of our circuit and layout design is to implement a 16-channel biphasic current mode programmable neural stimulator with calibration to minimize the current mismatch caused by inherent complementary metal oxide semiconductor (CMOS) manufacturing processes. Methods: This paper presents a 16-channel constant current mode neural stimulator chip. Each channel consists of a 7-bit controllable current DAC used as sink and source current driver. To reduce the LSB quantization error and the current mismatch, an automatic calibration circuit and flow diagram is presented in this paper. There are two modes of operation of the stimulator chip-namely, stimulation mode and calibration mode. The chip also includes a digital interface used to control the stimulator parameters and calibration levels specific for each individual channel. Results: This stimulator Application Specific Integrated Circuit (ASIC) is designed and fabricated in a 0.18 μm High-Voltage CMOS technology that allows for ±20 V power supply. The full-scale stimulation current was designed to be at 1 mA per channel. The output current was shown to be constant throughout the timing cycles over a wide range of electrode load impedances. The calibration circuit was also designed to reduce the effect of CMOS process variation of the P-channel metal oxide semiconductor (PMOS) and N-channel metal oxide semiconductor (NMOS) devices that will result in charge delivery to have less than 0.13% error. Conclusions: A 16-channel integrated biphasic neural stimulator chip with calibration is presented in this paper. The stimulator circuit design was simulated and the chip layout was completed. The chip layout was verified using design rules check (DRC) and layout versus schematic (LVS) design check using computer aided design (CAD) software. The test results we presented show constant current stimulation with charge balance error within 0.13% least-significant-bit (LSB). This LSB error was consistent throughout a variety stimulation patterns and electrode load impedances.

Interface Modeling and Analysis of Interphase-Delay Induced Charge Imbalance in Neural Stimulator Design

A Dual-Mode Neural Stimulator with Two-Step Charge Balancing Scheme for Fast Residual Voltage Compensation

An electrode-impedance-aware neurostimulator IC that achieves low-power consumption and fast charge balance

A Charge Balanced Neural Stimulator Silicon Chip for Human-Machine Interface

A 3-mV Precision Dual-Mode-Controlled Fast Charge Balancing for Implantable Biphasic Neural Stimulators

Does Charge Balancing Ensure the Safety of the Electrical Stimulation and Is It Power Efficientƒ

Development Of A Non-Invasive Deep Brain Stimulator With Precise Positioning And Real-Time Monitoring Of Bioimpedance

Design of a Net-Zero Charge Neural Stimulator with Feedback Control.

Electrochemical Impedance Behavior of Implantable Neural Interface Following the Change of Equivalent Circuit Element

Stimulation of microelectrode to deep brain regions: Simulation analysis using ANSYS software

16-Channel biphasic current-mode programmable charge balanced neural stimulation

Research on Design Method of Voltage Injection Test Circuit of Active Implantable Neurostimulator

Charge-Mode Neural Stimulator With a Capacitor-Reuse Residual Charge Detector and Active Charge Balancing for Epileptic Seizure Suppression

Design of Multi-channel Electrical Stimulator Integrated with Online Impedance Measurement

[A Design of Electrophysiological Stimulator].

Development and Evaluation of a Real-Time Phase-Triggered Stimulation Algorithm for the CorTec Brain Interchange

Electrode Design for Electrotactile Feedback With Reduced Interference to Myoelectric Signal

Computational modeling of neurostimulation in brain diseases

An Energy-Efficient Implantable-Neural-Stimulator System with Wireless Charging and Dynamic Voltage Output.

A Novel Biphasic-Current-Pulse Calibration Technique for Electrical Neural Stimulation

A Static Distributed-parameter Circuit Model Explains Electrical Stimulation on the Neuromuscular System