Abstract:The parameters obtained from the piezocone penetration tests (CPTU) are commonly used for soil profiling and geostratigraphy, along with the parameters used for assessment of geotechnical design. Numerous classification charts of soil behaviors are developed, but most of them are on the basis of ASTM Unified Soil Classification System (USCS), which is different from China' standards of soil classification. The relationship between CPTU measurements and engineering classification standards of soils in China needs to be established to take full advantage of piezocone soundings. Piezocone penetration tests, borings and laboratory tests are carried out at 95 locations of typical geologic formations in Jiangsu Province, China, in which, the distances between CPTU soundings and adjacent boreholes are less than 5 meters. Thus the CPTU data are fully analyzed and validated for providing a reasonable soil classification. Based on a systematic review of literatures, seven classification charts of soil behaviors are chosen to determine the soil types from the CPTU data at all the test sites, and these results are further validated with the soil classification types determined from the field samples and laboratory test results according to China's standards. It is shown that compared with the other six classification charts, the soil behavior classification based on the soil behavior type index Ic(RW) proposed by Robertson (2009) can give the best results, but the chart needs to be modified to adapt the region-specific feature. Thus, a soil classification chart based on the CPTU modified from Robertson (2009) and coordinated with China's standards is developed. In this chart, soils are classified as middle sand, fine sand, silty sand, silt, silty clay, clay, muck and mucky soils based on a normalized cone parameter Qtn with a variable stress exponent and normalized friction ratio Fr.

Soil classification method for port and waterway engineering based on piezocone penetration test

Practical soil classification methods in China based on piezocone penetration tests

Evaluation of CPTU-Based Soil Classification Charts for Offshore Sediments in Pearl River Delta, China

Application of CPTU-based soil classification methods in Hong Kong-Zhuhai-Macao Bridge

A Case Study on the Soil Classification of the Yellow River Delta Based on Piezocone Penetration Test

Soil Classification Using CPTU Data Based Upon Cluster Analysis Theory

Comparison of CPT Charts for Soil Classification Using PCPT Data: Example from Clay Deposits in Jiangsu Province, China

Marine Soil Behaviour Classification Using Piezocone Penetration Test (cptu) and Borehole Records

A Comprehensive Investigation on Onshore and Underwater Soils Using CPTU and DMT Tests: a Case Study in Yangtze River at Jiangsu, China

Piezocone Penetration Test-Based Site Characterisation of Chong-Qi Bridge Project, China

Cone Penetration Test (Cpt)-Based Subsurface Soil Classification and Zonation in Two-Dimensional Vertical Cross Section Using Bayesian Compressive Sampling

Practice And Development Of The Piezocone Penetration Test (Cptu) In Geotechnical Engineering Of China

Approach on the Engineering Properties of Lianyungang Marine Clay from Piezocone Penetration Tests

Geotechnical Characteristic Assessments of Floodplain Soils Using SCPTU Data in Nanjing, China

Applicability and Improvement of Soil Classification Methods in Delta Regions Based on the CPTU Database

Machine learning-enhanced soil classification by integrating borehole and CPTU data with noise filtering

An Approach to Evaluate Hydraulic Conductivity of Soil Based on Cptu Test

Identification of Soil Stratigraphy of Soft Deposit in Shanghai from CPTU Test

Study on Strength Properties and Soil Behaviour Type Classification of Huanghe River Delta Silts Based on Variable Rate Piezocone Penetration Test

A new graphical approach to assess CPTU-based correlations between hydraulic conductivity and soil behavior type

Identification of soil layer boundaries using mechanical layered method base on piezocone penetration test data