Nanoparticle-induced Control (mwcnts–tio2) on Grain Size and Tensile Strength Response and Multi-Response Optimization on TIG Welded Joints

Muhammad Muzamil,Jianjun Wu,Maaz Akhtar,Kashif Azher,Arfan Majeed,Zengkun Zhang,Atif Shazad

DOI: https://doi.org/10.1139/tcsme-2021-0210

2022-01-01

Transactions of the Canadian Society for Mechanical Engineering

Abstract:This study discusses the effectual variable parameters of multi-walled carbon nanotubes and titanium oxide (MWCNT–TiO2) contents and welding current in obtaining a response on mechanical behavior. The experimental work involved three levels of both parameters, which included 1, 1.5, and 2 wt.% of MWCNTs–TiO2 and 160, 180, and 200 A of current by forming a full design that represented a 32 (3 k) factorial model. The results of an analysis of variance (ANOVA) were critically employed to assess the variation between the variables and within their levels for approaching the significant combination of parameters. The joints welded with MWCNT–TiO2-coated fillers tendered a significant reduction in grain size (GS) along with high values of tensile strength (TS). From the ANOVA, it was determined that both the investigated parameters and their combined effect created a significant response for GS reduction and increment in TS. The presented empirical regression quadratic model was validated for the adequacy of the projected results that were shown to be acceptable with the experimental investigated data. In addition, the desirability function approach was applied for a multiple response optimization in yielding the desired responses of GS and TS and simultaneously providing an optimized set of process parameters. Thus, the function declared 1.5 wt.% MWCNT–TiO2 and 180 A as the optimized process set for delivering the maximum TS at the designated range of GS for this system.