Abstract:The morphological evolution and grain orientations of intermetallic compounds (IMCs) were investigated during the formation of full Cu3Sn joints at two soldering temperatures (310 and 430 °C). The mechanical properties of both types of full Cu3Sn joints were then analyzed. The experimental results showed that the morphology of interfacial IMCs varied significantly at two temperatures. At 310 °C, scallop-like Cu6Sn5 grains became larger but were fewer in number and the top of the scallops became rough due to the grain ripening effect. With the increase in the soldering temperature to 430 °C, Cu3Sn no longer grew uniformly as observed during soldering at 310 °C, but exhibited various growth rates. Furthermore, some η-Cu6Sn5 transformed into η′-Cu6Sn5 during cooling, and the following orientation groups between η′-Cu6Sn5 and η-Cu6Sn5, i.e., {102}η′ and {<math>112‾0</math>}η, {112}η′ and {<math>101‾0</math>}η, and {<math>2‾01</math>}η′ and {0001}η, were found to be near-parallel. The Cu3Sn grains were preferably oriented with [203] and [100] crystal orientations parallel to transverse direction (TD) at both temperatures. Noteworthy, the Cu3Sn grains with [203]//TD and [010]//ND grew much faster than those with other orientations at 430 °C. Moreover, molecular dynamics simulation showed that the diffusion coefficients of atoms in Cu3Sn crystals along [203] direction were significantly greater than those in other low-index crystal directions. After soldering, two types of full Cu3Sn joints obtained at different temperatures exhibited different shear strength and fracture mechanisms.

Investigation on growth of the orientation-preferred Cu6Sn5 on (001)Cu during the temperature-increased multiple reflow process

Thermal and Compositional Fields to Maneuver Cu 6 Sn 5 Intermetallic Growth on (111) Nanotwinned Copper Substrate

Orientation transformation of Cu6Sn5 grains by Ag addition in Cu/Sn-xAg/Cu micro solder joints under temperature gradient

Growth behavior and morphology evolution of interfacial (Cu,Ni)6Sn5 in (001)Cu/Sn/Ni micro solder joints

Influence behavior and mechanism of crystal orientation of Cu 6 Sn 5 coating on interfacial intermetallic compounds growth in Sn-0.7Cu/Cu solder joint

The Effect of Pressure and Orientation on Cu-Cu3Sn Interface Reliability under Isothermal Ageing and Monotonic Traction Via Molecular Dynamics Investigation

Heredity of preferred orientation of β-Sn grains in Cu/SAC305/Cu micro solder joints

The Effect Of Cu Orientation On Fracture Location In Cu3sn-Cu Interface Structure Under Monotonic Loading Condition By Molecular Dynamics Simulation

Formation and evolution of irregularly arranged prism-type Cu6Sn5 grains on electroplated (111) textured Cu

Nucleation and growth of Cu6Sn5 during the aging process of Cu/Sn interface in electronic packaging-by in-situ TEM

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

Investigating the preferential growth of Bi grains in Sn-Bi based solder under thermal aging

A Molecular Dynamics Investigation of the Effect of Pressure and Orientation on the Cu Consumption in Cu-Cu3Sn Interface under Isothermal Ageing and Its Dissipative Mechanisms during Traction

The Effect of Cu Orientation on Fracture Location in Cu<inf>3</inf>Sn-Cu Interface Structure Under Monotonic Loading Condition by Molecular Dynamics Simulation

Growth Velocity-Undercooling Relationship and Structure Refinement Mechanism of Undercooled Ni-Cu Alloys

Investigation on interfacial compound growth kinetics in Sn-0.7Cu/Cu solder joint and mechanism analysis: Experiments and molecular dynamics simulations

Inhibition of roof-type Cu6Sn5 grains on migration of Cu atoms under temperature gradient

Morphology evolution and grain orientations of intermetallic compounds during the formation of full Cu3Sn joint

Solidification behavior of Sn crystals − Under different temperature gradients

Grain orientations and failures mechanism of isothermal aged nano Sn-3Ag-0.5Cu/Cu solder joints by microwave hybrid heating and sheer mechanical strength

High-temperature effects on kinetics and grain orientation of the Cu41Sn11 phase formed from the full Cu3Sn joint during the aging process