Single-Crystal LiNi0.6Co0.2Mn0.2O2: Facile Preparation and Electrochemical Performance

Lu Yong-Gang,Xiang Bo,Wang Zhen-Tao,Zhang Peng,Chen Fang,Xie Jian,Zhao Xin-Bing
DOI: https://doi.org/10.11862/CJIC.2022.055
2022-01-01
Chinese journal of inorganic chemistry
Abstract:Single. crystal LiNi0.6Co0.2Mn0.2O2 (NCM622) was prepared by a facile solid. state calcination method at 910 degrees C using Ni0.6Co0.2Mn0.2(OH)(2) and LiOH center dot H2O as the precursors with no excess of LiOH center dot H2O. As.obtained materi. al can be used to make electrode slurry directly with no need to wash, dry, and anneal. Electrochemical tests showed that the single. crystal NCM622 has a high specific capacity and a long cycle life. The first discharge capacity of the sample was 181.2 mAh.g(-1) at 0.1C and 174.4 mAh.g(-1) at 0.3C. Under a current density of 0.3C, the sample deliv. ered a discharge capacity of 150.7 mAh.g(-1) after 300 cycles with a capacity retention of 86.4%. After 500 cycles at 0.3C, a relatively high discharge capacity of 141.2 mAh.g(-1) was still maintained with a capacity retention of 81.0%. The electrochemical performance of single. crystal NCM622 prepared at 910. was better than that of polycrystal. line NCM622 prepared at 850. and large. size single. crystal NCM622 prepared at 940 and 960 degrees C, indicating that the reasonable calcination temperature for single crystal NCM622 was 910.. The results show that the structural stability of single-crystal NCM622 can be maintained during repeated cycling.
What problem does this paper attempt to address?