Abstract:Earthquakes contain complex components in both the horizontal and vertical directions. However, most vibration control strategies work only in a single direction. The existing multi-dimensional isolation devices usually have complex designs and low damping ratios; hence, the stability of structures that incorporate the devices is currently insufficient. This study designs a novel multi-dimensional isolation and mitigation device based on viscoelastic damping technology (VE-MDIMD). The device consists of a core bearing and several cylindrical dampers, providing vibration control capacity in both the horizontal and vertical directions and a strong uplift resistance. To evaluate the device's performance, a series of dynamic tests are conducted on the cylindrical damper utilized in the device. The results show that the damper's mechanical properties exhibit a pronounced dependence on the frequency and amplitude, and its hysteresis curves become obviously nonlinear with increased deformation. Subsequently, to describe the behavior of the VE-MDIMD, a mechanical model is established which combines the construction of the device and the characteristics of the damper. Considering the limitations of existing models in fully capturing the nonlinear behavior of the damper, a novel multi-scale model is proposed based on the microstructure of viscoelastic material. The experimental verification confirms that the model can accurately capture the frequency and amplitude dependence, as well as the nonlinear hysteresis behavior, of the damper. Finally, the effectiveness of the VE-MDIMD is evaluated through the dynamic analysis of an actual structure. The arrangement of the device in the structure is optimized based on a multi-objective genetic algorithm available in Matlab (R2019b) and OpenSEES (Version 3.0.0). The results demonstrate the device's superiority in controlling both horizontal and vertical vibrations in the superstructure.

Development of Electric Actuator Hybrid Test System and Experimental Study on Viscoelastic Damping Structures

Remote Hybrid Testing of Asymmetric Structures under Earthquake Excitation

Active Vibration Control of Flexible Structures with Super-Coiled Actuators

Test, Modeling, and Vibration Control of a Novel Viscoelastic Multi-Dimensional Earthquake Isolation and Mitigation Device

Controller-extensible hybrid simulation platform for viscoelastically damped frame structures based on Matlab-Opensees frameworks

Distributed Structural Dynamics Control of Flexible Manipulators—ii. Distributed Sensor and Active Electromechanical Actuator

Decoupling Compensation for Damping Improvement of the Electrohydraulic Control System with Multiple Actuators

Development of a Versatile Hybrid Testing System for Seismic Experimentation

A Hybrid Photovoltaic/flexoelectric Actuation Mechanism Applied to Precision Actuation and Vibration Control of Beams

Electric-Hydraulic Actuator Design for a Hybrid Squeeze-Film Damper-Mounted Rigid Rotor System With Active Control

Experimental and numerical investigation of a novel passive energy dissipation system with viscoelastic damper and angle-reaction controller

A real-time hybrid testing based on shaking table and actuator for cable tray systems

Mechanical Model of a Hybrid Non-linear Viscoelastic Material Damping Device With Its Verifications

Mechanism of Electro-Hydraulic Exciter for New Tamping Device

Shaking table test and seismic behaviour evaluation of viscous damping wall with amplification mechanism

Experimental Study of Viscoelastic Dampers under Large Deformation

Concept, analysis, and test of a self‐centering viscous damper with displacement capacity enhancement

Parameter optimization of vibration control system for adjacent building structures based on negative stiffness inerter damper

Development of Magnetorheological Dampers with Embedded Piezoelectric Force Sensors for Structural Vibration Control

Performance enhancement of damaged RC structures with viscoelastic dampers: Damage assessment and optimal placement

Design Method of Viscous Dampers in Shaking Table Model Test