Abstract:Real-time hybrid simulation is an efficient and cost-effective dynamic testing technique for performance evaluation of structural systems subjected to earthquake loading with rate-dependent behavior. A loading assembly with multiple actuators is required to impose realistic boundary conditions on physical specimens. However, such a testing system is expected to exhibit significant dynamic coupling of the actuators and suffer from time lags that are associated with the dynamics of the servo-hydraulic system, as well as control-structure interaction (CSI). One approach to reducing experimental errors considers a multi-input, multi-output (MIMO) controller design, yielding accurate reference tracking and noise rejection. In this paper, a framework for multi-axial real-time hybrid simulation (maRTHS) testing is presented. The methodology employs a real-time feedback-feedforward controller for multiple actuators commanded in Cartesian coordinates. Kinematic transformations between actuator space and Cartesian space are derived for all six-degrees-offreedom of the moving platform. Then, a frequency domain identification technique is used to develop an accurate MIMO transfer function of the system. Further, a Cartesian-domain model-based feedforward-feedback controller is implemented for time lag compensation and to increase the robustness of the reference tracking for given model uncertainty. The framework is implemented using the 1/5th-scale Load and Boundary Condition Box (LBCB) located at the University of Illinois at Urbana- Champaign. To demonstrate the efficacy of the proposed methodology, a single-story frame subjected to earthquake loading is tested. One of the columns in the frame is represented physically in the laboratory as a cantilevered steel column. For realtime execution, the numerical substructure, kinematic transformations, and controllers are implemented on a digital signal processor. Results show excellent performance of the maRTHS framework when six-degrees-of-freedom are controlled at the interface between substructures.

Controller-extensible hybrid simulation platform for viscoelastically damped frame structures based on Matlab-Opensees frameworks

Remote Collaborative Pseudo-dynamic Tests of a Ten-story Concrete Filled Steel Tubular Composite Frame

Study on remote collaborative pseudo-dynamic tests of multi-story frames

NETWORKED STRUCTURAL LABORATORIES:DEVELOPMENT AND APPLICATION OF REMOTE PSEUDO-DYNAMIC TESTING PLATFORMS FOR BRIDGE STRUCTURES

Development Of Netslab Based Hybrid Testing Platform For Bridge Structures

Development of a Remotely Collaborative Pseudo-dynamic Testing Platform for Bridge Structures

Remote Hybrid Testing of Asymmetric Structures under Earthquake Excitation

Hybrid simulation framework with mixed displacement and force control for fully compatible displacements

Model-based framework for multi-axial real-time hybrid simulation testing

Comprehensive Assessment of the Seismic Performance of an Innovative Hybrid Semiactive and Passive State Control System for a Low-Degree-of-Freedom Structure Using Real-Time Hybrid Simulation

Large‐scale hybrid test of a curved bridge considering complete boundary condition by a large spatial loading system

Simplified Analysis of Frame Structures with Viscoelastic Dampers Considering the Effect of Soil-Structure Interaction

Experimental investigation and seismic response behavior of a self-centering precast concrete frame with hysteretic dampers

Implementation of real-time hybrid simulation using a large shake table with onboard actuators

Seismic performance improvement of continuous rigid-frame bridges with hybrid control system under near-fault ground motions

Optimal Design of Viscoelastic Dampers in Frame Structures Considering Soil-Structure Interaction Effect

Seismic Performance of Self-centering Steel Frames with SMA-viscoelastic Hybrid Braces

Large-Scale Real-Time Hybrid Simulation for Evaluation of Advanced Damping System Performance

Development of Electric Actuator Hybrid Test System and Experimental Study on Viscoelastic Damping Structures

Seismic control performance of a three‐story frame prototype equipped with semi‐active variable stiffness and damping structural joints

Study on Extrapolation-Newmark Optimal Compensation Strategy of Real-Time Hybrid Test System