Abstract:Laser polishing is a noncontact and efficient processing method for surface treatment of different materials. It removes surface material and improves its quality by means of a laser beam that acts directly on the surface of the material. The material surface roughness is a major criterion that evaluates the polishing effect when alumina ceramics are polished by a laser. In this study, the effects of three factors, namely, laser power, scanning speed, and pulse frequency, on the surface roughness were investigated through orthogonal tests. The optimum polishing parameters were obtained through a comparison of the experimental results. Compared to the initial surface roughness (Ra = 1.624 μm), the roughness of the polished surface was reduced to Ra = 0.549 μm. A transient two-dimensional model was established by the COMSOL Multiphysics 5.5, and the flow condition of the material inside the molten pool of laser-polished alumina ceramics and the surface morphology of the smoothing process were investigated by utilizing the optimal polishing parameters obtained from the experiments. The simulation results showed that in the process of laser polishing, the fluid inside the molten pool flowed from the peaks to the valleys under the action of capillary force, and the inside of the molten pool tended to be smoothened gradually. In order to verify the correctness of the numerical model, the surface profile at the same position on the material surface was compared, and the results showed that the maximum error between the numerical simulation and the experimental results was 17.8%.

Numerical and Experimental Analysis for Morphology Evolution of 6061 Aluminum Alloy During Nanosecond Pulsed Laser Cleaning

Experimental and numerical simulation analysis of laser paint removal of aluminum alloy

Numerical Simulation and Experimental Study of Nanosecond Pulsed Laser Cleaning of Aluminum Alloy Surface Paint Layer

Experimental study and mechanism analysis of a pulsed laser cleaning aluminum alloy process

The Characterization of Laser-Induced Particles Generated from Aluminum Alloy in High Power Laser Facility

NEUROMUSCULOSKELETAL EXAMINATION AND ASSESSMENT

Effect of nitroblue tetrazolium concentration on the fructosamine assay for quantifying glycated protein.

Removal mechanism of laser cleaning for inorganic thermal control coatings on aluminum alloys

Effect of laser energy density on surface physical characteristics and corrosion resistance of 7075 aluminum alloy in laser cleaning

Determination on Surface Morphology of Laser Non-Destructive Cleaning Coatings on Aviation Aluminum Alloy

In-Situ Laser Polishing Additive Manufactured AlSi10Mg: Effect of Laser Polishing Strategy on Surface Morphology, Roughness and Microhardness

The energy density threshold evaluation for high-precision laser cleaning of the oxidized layer on 7075 aluminum alloy with 100 ns laser

Investigation on the Surface Properties of 5A12 Aluminum Alloy after Nd: YAG Laser Cleaning

Thermal stress analysis of laser cleaning of aluminum alloy oxide film

Numerical Simulation and Validation of Laser Polishing of Alumina Ceramic Surface

Computational Modeling and Experimental Validation of Thermal Stress and Melt Pool Characteristics Using High Power Laser Diode Beam on 7075 Aluminum Alloy

Exploring the machining characteristics of aluminum 6061 using nanosecond pulse fiber laser machine

Nanosecond pulsed laser cleaning of titanium alloy oxide films: Modeling and experiments

Simulation and Experimental Study of Nanosecond Pulse Laser Removal of Epoxy Paint on 6061 Aluminum Alloy Surface

Experimental study on hydrophobic properties and corrosivity of laser cleaned 7075 aluminum alloy anodized film surface

Surface morphology evolution mechanisms of pulse laser polishing mold steel