Abstract:In the paper, the study involves the development of novel recyclable multi-walled carbon nanotubes/attapulgite supported nanoscale zero-valent iron (nZVI/MWCNTs/APT) composites and used for the removal cationic dyes methylene blue (MB) and malachite green (MG) in binary systems. The morphology and structure of ternary nanocomposites were characterized by using different techniques like transmission electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, Brunauer-Emmett-Teller, and ZETA. And remove performances for MB and MG were investigated in detail. The experimental results revealed that the dispersion and stability of nZVI were significantly improved by MWCNTs/APT composite as a supporter. Compared to bare nZVI, the nZVI/MWCNTs/APT exhibited much higher removal efficiency on MB and MG due to the good synergistic effect between MWCNT/APT adsorption and nZVI reduction. The removal efficiencies of MB and MG in the nZVI/MWCNTs/APT system were 97.9% and 98.9% after reacting for 90 min, respectively. The kinetics and isotherm studies for MG and MB degradation by nZVI/MWCNTs/APT system could be well described by the pseudo-second-order kinetic model and Langmuir adsorption isotherm model. The maximum adsorption capacities of MB and MG reached to 149.9 and 177.9 mg/g, respectively, which showed higher adsorption performances compared to the other adsorbents. The possible removal mechanism and degraded intermediates of MG and MB were proposed by using gas chromatograph-mass spectrometry analysis and UV-vis spectrum techniques. More importantly, the spent adsorbent has a certain specific capacitance and can be used as electrode materials in supercapacitors, which provides a basis for the recycling of discarded materials. The present investigation concluded that nZVI/MWCNTs/APT nanocomposites might be a suitable and cost-effective alternative for the removal of organic dyes in wastewater.

Humic acid non-covalent functionalized multi-walled carbon nanotubes composite membrane and its application for the removal of organic dyes

Improving the Performance of Polyamide Reverse Osmosis Membrane by Incorporation of Modified Multi-Walled Carbon Nanotubes

Boosting the Adsorption and Removal of Dye from Water by COOH-functionalized Carbon Nanotubes

Robust and Highly Efficient Free‐Standing Carbonaceous Nanofiber Membranes for Water Purification

Preparation of high-flux thin film nanocomposite reverse osmosis membranes by incorporating functionalized multi-walled carbon nanotubes

Preparation of organic–inorganic hybrid membranes with superior antifouling property by incorporating polymer-modified multiwall carbon nanotubes

Aramid Nanofiber Membranes Reinforced by MXene Nanosheets for Recovery of Dyes from Textile Wastewater

Facile preparation of water-soluble hyperbranched polyamine functionalized multiwalled carbon nanotubes for high-efficiency organic dye removal from aqueous solution

Super-adsorptive and photo-regenerable carbon nanotube based membrane for highly efficient water purification

Fabrication of TiO2/MWNTs/Al2O3 composite membrane and its performance in water treatment

Antifouling and Chemical-Resistant Nanofiltration Membrane Modulated by a Functionalized MWCNT Interlayer for Efficient Dye/Salt Separation at High Salinity

Functionalization of cellulose acetate nanofibrous membranes for removal of particulate matters and dyes

Composite membranes with multifunctionalities for processing textile wastewater: Simultaneous oil/water separation and dye adsorption/degradation

Construction of Highly Hydrophilic PAN-co-IA/CNTs@TA Composite Membrane with Large Flux and High Retention for Purification of Dye Wastewater

Surface decoration of bis-aminosilane cross-linked multiwall carbon nanotube ultrafiltration membrane for fast and efficient heavy metal removal

Bio-inspired Fabrication of Adsorptive Ultrafiltration Membrane for Water Purification: Simultaneous Removal of Natural Organic Matters, Lead Ion and Organic Dyes

Amino-Functionalized Multi-Walled Carbon Nanotubes As Novel Adsorbents for Selective Adsorption of Anionic Dyes in Aqueous Solution

Simultaneous Removal of Binary Cationic Dyes from Wastewater by Nanoscale Zero-Valent Iron Particles Supported on Multiwalled Carbon Nanotubes/attapulgite

Modification of regenerated cellulose ultrafiltration membranes with multi-walled carbon nanotubes for enhanced antifouling ability: Field test and mechanism study

Selective Adsorption and Separation through Molecular Filtration by Hyperbranched Poly(ether amine)/Carbon Nanotube Ultrathin Membranes

Preparation of MnO 2 Loaded Hydrothermal Carbon-coated Electrospun PAN Fiber Membranes for Highly Efficient Adsorption and Separation of Cationic Dye