Abstract:Most recently, the continuous deterioration of the aquatic environment triggered by both heavy metals and synthetic organic dyes has imparted serious threats to the ecosphere and drinking water safety. However, it is still extremely challenging to treat complex wastewater containing these two classes of pollutants via a one-step method owing to the significant differences in their physicochemical properties. In the current work, versatile magnetic MWCNTs decorated with PEI (denoted as MWCNTs@Fe3O4/PEI) was fabricated by a facile, rapid and reproducible strategy and applied to as a robust adsorbent for simultaneously removing methyl orange (MO) and Cr(vi) from aqueous solutions. The physicochemical properties of the as-designed nanohybrid were investigated using various analytical techniques, i.e. XRD, FT-IR, SEM, TEM, VSM, zeta potential, etc. It was found that the surface charge properties of the MWCNTs as well as its dispersion in aqueous solution were greatly changed after the introduction of PEI molecules. The resulting nanohybrid exhibited attractive adsorption capabilities toward anionic MO and Cr(vi). In the perspective of a mono-pollutant system, the time-dependent adsorption process matched well with a pseudo-second-order kinetics equation, the adsorption isotherm data at r.t. were well fitted by a Langmuir model with maximum monolayer uptake capacity of 1727.6 mg g-1 for MO and 98.8 mg g-1 for Cr(vi), and the removal process of both pollutants was thermodynamically spontaneous and exothermic. In the MO-Cr(vi) binary system, the uptake of Cr(vi) by the as-prepared adsorbent was evidently enhanced by the presence of MO, while the coexisting Cr(vi) exerted a small negative effect on the sorption of MO; which was attributed to the different adsorption mechanisms of both pollutants on the as-recommend adsorbent. The much better adsorbing performance of the resulting MWCNTs@Fe3O4/PEI for MO and Cr(vi) than that of the pristine MWCNTs or the MWCNTs/Fe3O4 composite was mainly ascribed to the high surface area of the MWCNTs, the high density of protonated N-rich groups of PEI as well as the excellent dispersion and solubility of the resulting nanocomposites. Moreover, the obtained nanohybrids can be easily recovered after being used by a permanent magnet and still retained high stability and excellent reusability after consecutive adsorption-desorption cycles, implying its great potential in practical applications. Therefore, the as-fabricated MWCNTs@Fe3O4/PEI composite could be recommended as a promising candidate adsorbent for the simultaneous capture of MO and Cr(vi) from complex wastewater via multiple uptake mechanisms (e.g. electrostatic attraction, π-π stacking and hydrogen bonding).

Simultaneous Removal of Binary Cationic Dyes from Wastewater by Nanoscale Zero-Valent Iron Particles Supported on Multiwalled Carbon Nanotubes/attapulgite

Ce-UiO-66-F4-based Composites Decorated with Green Carbon Dots for Universal Adsorption of Organic Pollutants Containing Hydrogen Bond Donors and Its Application Exploration

Boosting the Adsorption and Removal of Dye from Water by COOH-functionalized Carbon Nanotubes

Efficient Removal of Methylene Blue by Fenton-Like Reaction Using Nzvi/Gac Composite As Catalyst

Effective sorptive removal of five cationic dyes from aqueous solutions by using magnetic multi-walled carbon nanotubes

A Research on the Removal Characteristics of Naphthol Green B from Wastewater Using Nanomaterials Nzvi/cs/apt

Simultaneous Capture of Methyl Orange and Chromium(vi) from Complex Wastewater Using Polyethylenimine Cation Decorated Magnetic Carbon Nanotubes As a Recyclable Adsorbent

A New Solid Phase Extractor Based on Cross-linked PMMA@CNTs/GNP for the Removal of Crystal Violet and Methylene Blue Dyes

Removal of chromium(VI) from wastewater by nanoscale zero-valent iron particles supported on multiwalled carbon nanotubes

Efficient removal of noxious methylene blue and crystal violet dyes at neutral conditions by reusable montmorillonite/NiFe2O4@amine-functionalized chitosan composite

Removal of Cationic Dyes from Aqueous Solutions Using Adsorbents Based on GO/APTG Nanocomposites

Degradation of Chlortetracycline with Simultaneous Removal of Copper (II) from Aqueous Solution Using Wheat Straw-Supported Nanoscale Zero-Valent Iron

Synergy of Photocatalysis and Adsorption for Simultaneous Removal of Hexavalent Chromium and Methylene Blue by g-C3N4/BiFeO3/Carbon Nanotubes Ternary Composites

Simultaneous Adsorption and Degradation Tetracycline and Heavy Metals Using Polyaniline/chitosan to Loading Nanoscale Zero-Valent Iron

Removal of Crystal Violet and Methylene Blue from Aqueous Solutions Using the Fly Ash-Based Adsorbent Material-Supported Zero-Valent Iron

Removal of anionic and cationic dyes from wastewater by adsorption using multiwall carbon nanotubes

A green synthesized medicine residue carbon-based iron composite for the removal of chromium (VI) and cadmium (II): Performance, kinetics and mechanism

Preparation of Biomass Activated Carbon Supported Nanoscale Zero-Valent Iron (nzvi) and Its Application in Decolorization of Methyl Orange from Aqueous Solution

Novel Synthesis of Carbon Spheres Supported Nanoscale Zero-Valent Iron for Removal of Metronidazole

3D Porous Structure-Inspired Lignocellulosic Biosorbent of Medulla Tetrapanacis for Efficient Adsorption of Cationic Dyes

Efficient U(VI) removal by Ti3C2Tx nanosheets modified with sulfidated nano zero-valent iron: Batch experiments, mechanism, and biotoxicity assessment