Abstract:Most recently, the continuous deterioration of the aquatic environment triggered by both heavy metals and synthetic organic dyes has imparted serious threats to the ecosphere and drinking water safety. However, it is still extremely challenging to treat complex wastewater containing these two classes of pollutants via a one-step method owing to the significant differences in their physicochemical properties. In the current work, versatile magnetic MWCNTs decorated with PEI (denoted as MWCNTs@Fe3O4/PEI) was fabricated by a facile, rapid and reproducible strategy and applied to as a robust adsorbent for simultaneously removing methyl orange (MO) and Cr(vi) from aqueous solutions. The physicochemical properties of the as-designed nanohybrid were investigated using various analytical techniques, i.e. XRD, FT-IR, SEM, TEM, VSM, zeta potential, etc. It was found that the surface charge properties of the MWCNTs as well as its dispersion in aqueous solution were greatly changed after the introduction of PEI molecules. The resulting nanohybrid exhibited attractive adsorption capabilities toward anionic MO and Cr(vi). In the perspective of a mono-pollutant system, the time-dependent adsorption process matched well with a pseudo-second-order kinetics equation, the adsorption isotherm data at r.t. were well fitted by a Langmuir model with maximum monolayer uptake capacity of 1727.6 mg g-1 for MO and 98.8 mg g-1 for Cr(vi), and the removal process of both pollutants was thermodynamically spontaneous and exothermic. In the MO-Cr(vi) binary system, the uptake of Cr(vi) by the as-prepared adsorbent was evidently enhanced by the presence of MO, while the coexisting Cr(vi) exerted a small negative effect on the sorption of MO; which was attributed to the different adsorption mechanisms of both pollutants on the as-recommend adsorbent. The much better adsorbing performance of the resulting MWCNTs@Fe3O4/PEI for MO and Cr(vi) than that of the pristine MWCNTs or the MWCNTs/Fe3O4 composite was mainly ascribed to the high surface area of the MWCNTs, the high density of protonated N-rich groups of PEI as well as the excellent dispersion and solubility of the resulting nanocomposites. Moreover, the obtained nanohybrids can be easily recovered after being used by a permanent magnet and still retained high stability and excellent reusability after consecutive adsorption-desorption cycles, implying its great potential in practical applications. Therefore, the as-fabricated MWCNTs@Fe3O4/PEI composite could be recommended as a promising candidate adsorbent for the simultaneous capture of MO and Cr(vi) from complex wastewater via multiple uptake mechanisms (e.g. electrostatic attraction, π-π stacking and hydrogen bonding).

Synergy of Photocatalysis and Adsorption for Simultaneous Removal of Hexavalent Chromium and Methylene Blue by g-C3N4/BiFeO3/Carbon Nanotubes Ternary Composites

[Simultaneous Remediation of Cr (VI) and P-Ncb by Nanosacle Iron].

Enhanced Catalytic Oxidation Via Nano Cu0.5Mg0.5Fe2O4 Embedded in CNTs for Adsorption–reduction of Hexavalent Chromium

Synergistic Catalytic Organic Pollutants Degradation and Cr(VI) Reduction by Carbon Nanotubes Through an Electron-Transfer Mechanism Without External Energy or Chemical Input

One stone two birds: novel carbon nanotube/Bi4VO8Cl photocatalyst for simultaneous organic pollutants degradation and Cr(VI) reduction

Simultaneous Capture of Methyl Orange and Chromium(vi) from Complex Wastewater Using Polyethylenimine Cation Decorated Magnetic Carbon Nanotubes As a Recyclable Adsorbent

Facile fabrication of magnetically recyclable Fe3O4/BiVO4/CuS heterojunction photocatalyst for boosting simultaneous Cr(VI) reduction and methylene blue degradation under visible light

Photocatalytic Reduction of Hexavalent Chromium Using Cu3.21Bi4.79S9/g-C3N4 Nanocomposite

Simultaneous Removal of Cr(VI) and 4-Chlorophenol Through Photocatalysis by a Novel Anatase/titanate Nanosheet Composite: Synergetic Promotion Effect and Autosynchronous Doping.

Synergistic effect of adsorption-photocatalytic reduction of Cr(VI) in wastewater with biochar/TiO2 composite under simulated sunlight illumination

Removal of Total Chromium in Wastewater Via Simultaneous Photocatalysis and Adsorption Using Calcium Silicate Hydrate-Based Composites

Simultaneous Removal of Binary Cationic Dyes from Wastewater by Nanoscale Zero-Valent Iron Particles Supported on Multiwalled Carbon Nanotubes/attapulgite

Facile fabrication of magnetically recyclable Fe<sub>3</sub>O<sub>4</sub>/BiVO<sub>4</sub>/CuS heterojunction photocatalyst for boosting simultaneous Cr(VI) reduction and methylene blue degradation under visible light

Synthesis of triethylenetetramine modified sodium alginate/CuS nanocrystal composite for enhanced Cr(VI) removal: Performance and mechanism

Enhanced electron transfer via synergistic electric field effects in g-C3N4/MoS2 piezo-photocatalysis for hexavalent chromium removal

Synchronous removal of oxytetracycline and Cr(VI) in Fenton-like photocatalysis process driven by MnFe2O4/g-C3N4: Performance and mechanisms

Visible-light-driven Z-scheme ternary Fe3O4/TiO2/g-C3N4 nanocomposite as reusable photocatalyst for efficient removal of dyes and chromium in water

Synergistic Interactions Between Multi-Walled Carbon Nanotubes and Toxic Hexavalent Chromium

Multi-Walled Carbon Nanotubes Modified NiCo2S4 for the Efficient Photocatalytic Reduction of Hexavalent Chromium

Preparation of Air-Stable Magnetic G-C3n4@fe-0-graphene Composite by New Reduction Method for Simultaneous and Synergistic Conversion of Organic Dyes and Heavy Metal Ions in Aqueous Solution

Synergy of Photocatalysis and Adsorption for Simultaneous Removal of Cr(VI) and Cr(III) with TiO2 and Titanate Nanotubes