Abstract:Peroxymonosulfate-based electrochemical advanced oxidation processes (PMS-EAOPs) have great potential for sustainable water purification, so an in-depth understanding of its catalytic mechanism is imperative to facilitate its practical application. Herein, the performance enhancement and mechanism of electroenhanced PMS activation by single-atom Fe catalyst modified carbon felt was investigated. Compared with the anode, the cathode exhibited faster bisphenol A degradation (kcathode = 0.073 vs. kanode = 0.015 min-1), increased PMS consumption (98.8 vs. 10.3%), and an order of magnitude reduction of Fe dissolution (0.068 vs. 0.787 mg L-1). Mass transfer is a key factor limiting PMS activation, while the electrostriction of water in the hydrophobic region caused by cathode electric field (CEF) significantly increased mass transfer coefficient (km, cathode = 1.49 × 10-4 vs. km, anode = 2.68 × 10-5 m s-1). The enhanced activation of PMS is a synergistic result between electroactivation and catalyst-activation, which is controlled by the applied current density. 1O2 and direct electron transfer are the main active species and activation pathway, which achieve high degradation efficiency over pH 3 to 10. Density functional theory calculations prove CEF increases the adsorption energy, lengthens the O-O bond in PMS, and promotes charge transfer. A flow-through convection unit achieves sustainable operation with high removal efficiency (99.5% to 97.5%), low electrical energy consumption (0.15 kWh log-1 m-3), and low Fe leaching (0.81% of the total single atom Fe). This work reveals the critical role of electric fields in modulating Fenton-like catalytic activity, which may advance the development of advanced oxidation processes and other electrocatalytic applications.

Fe2+/heat-coactivated PMS Oxidation-Absorption System for H2S Removal from Gas Phase

A Thermally Activated Double Oxidants Advanced Oxidation System for Gaseous H2S Removal: Mechanism and Kinetics

Mechanical insights into desulfurization by peroxymonosulfate oxidation via a non-reactive oxygen species pathway

Activation of Peroxymonosulfate by CoS2 Loaded Air-Laid Cloth for Rapid Degradation of Organic Pollutants in a Shallow Continuous Flow Reactor

Combination Of Non-Thermal Plasma And Activated Carbon Fibers For Decomposition Of Hydrogen Sulfide

Removal of Gaseous Hydrogen Sulfide by a FeOCl/H2O2 Wet Oxidation System

Removal of Trace Gaseous H2s by a Ts-1/H2o2 Wet Oxidation System

Sulfide enhances the Fe(II)/Fe(III) cycle in Fe(III)-peroxymonosulfate system for rapid removal of organic contaminants: Treatment efficiency, kinetics and mechanism

Removal of Gaseous H2S by the Titanium Silicalite-1/H2O2 Wet Oxidation System

Deep mineralization of VOCs in an embedded hybrid structure CoFe2O4/MoS2/PMS wet scrubber system

Dual-path activation of peroxymonosulfate by S vacancies in Mo/Fe-S for antibacterial applications

Enhanced production of Fe(II) and Fe(0) by elemental sulfur modification on iron oxide to boost peroxymonosulfate activation for pollutants removal

Removal of Gaseous Hydrogen Sulfide by a FeOCl/H 2 O 2 Wet Oxidation System

Heterogeneous activation of peroxymonosulfate by flower-like cobalt sulfide enhanced sulfamethoxazole degradation via non-radical pathways

Performance enhancement and mechanism of electroenhanced peroxymonosulfate activation by single-atom Fe catalyst modified electrodes

New insight into the mechanism of electro-assisted pyrite minerals activation of peroxymonosulfate: Synergistic effects, activation sites and electron transfer

Iron cobalt and nitrogen co-doped carbonized wood sponge for peroxymonosulfate activation: Performance and internal temperature-dependent mechanism

Fabrication of FeOCl/MoS2 catalytic membranes for pollutant degradation and alleviating membrane fouling with peroxymonosulfate activation

A Novel Double Metal Ions-Double Oxidants Coactivation System for NO and SO2 Simultaneous Removal

H2S Removal from Biogas using Steel Wool (Fe2O3) Adsorption Combined with Water Absorption: Experimental and Modelling via RSM

A gas permeable membrane electrode for selective and durable H2S production from SO2