Abstract:When two surfaces in static contacts are subjected to combined loads applied in the normal and tangential directions, or just a normal load for dissimilar materials, microscopic slip would take place at certain areas of the contact region even though the contacting bodies remain still without macroscopic movement. The micro-slip is considered a major cause of fretting wear for the materials in contacts under alternating dynamic load or vibration, referred as the fretting contacts in this study. The fretting contact problem was solved using a semi-analytical method (SAM), in which analytical relations between a unite stress and corresponding surface displacement were obtained on the basis of Green functions. The contact pressure and shear tractions were then calculated by minimizing the complementary energy, and by a numerical procedure based on Conjugate Gradient Method (CGM) and Fast Fourier Transform (FFT) technique. The algorithm is very effective since the meshes are applied to the positions just in the contact areas of interest, which saves the computing time. The fretting contacts of dissimilar materials were studied and the effects of surface roughness were analyzed. Results show that the coupled effects of shear traction and material dissimilarity make the traction distributions quite different with the solutions from similar materials. The solutions under dynamic load depend on the path or history of the loading process, but the stress distributions and load-displacement curves will quickly converge to a periodic stability after several load cycles.

Implementation of an Arbitrary Lagrangian–Eulerian Method to Optimise the Shapes of Contact Surfaces

A Model Order Reduction Method for the Simulation of Gear Contacts Based on Arbitrary Lagrangian Eulerian Formulation

Enhanced Moving Finite Element Method Based on Error Geometric Estimation for Simultaneous Trajectory Optimization

Numerical evaluation of the transient response due to non-smooth rolling contact using an arbitrary Lagrangian–Eulerian formulation

Parametric Quadratic Programming Method for Dynamic Contact Problems with Friction

A Contact Method for B-spline Material Point Method with Application in Impact and Penetration Problems

A Comparative Analysis of Contact Algorithms in Contact Shape Optimization Problems

A Free‐interface Component Mode Synthesis of Moving Contact Multibodies and Its Application to Gear Contacts

Finite element modelling of frictional thermomechanical rolling/sliding contact using an arbitrary Lagrangian–Eulerian formulation

A Numerical Solution For Fretting Contacts

A CONTACT ALGORITHM BASED ON EXTENDED FINITE ELEMENT METHOD

An efficient method for electro-thermo-mechanical coupling effect in electrical contact on rough surfaces

Level set shape and topology optimization of finite strain bilateral contact problems

Finite element analysis of transient thermomechanical rolling contact using an efficient arbitrary Lagrangian–Eulerian description

A Scaled Boundary Finite-Element Method with B-Differentiable Equations for 3D Frictional Contact Problems

Arbitrarily-shaped contact boundary processing in application of meshless method for the simulation of metal forming process

A Simulation Method of Thermo-Mechanical and Tribological Coupled Analysis in Dry Sliding Systems

THE ADVANCES OF STUDIES ON THE DYNAMIC CONTACTPROBLEM AND ITS NUMERICAL METHODS

Numerical Running-In Method for Modifying Cylindrical Roller Profile under Mixed Lubrication of Finite Line Contacts

Equal heat flux loading optimization approach for uniform wear of the wet brake

A Simplified Numerical Elastic-Plastic Contact Model for Rough Surfaces