Synthesis and Coating Properties of Carboxylated Fluorinated Poly (arylene ether)

Zhang Wenmeng,Li Mengqin,Hou Zhen,Chen Dongyang

DOI: https://doi.org/10.7503/cjcu20210604

2022-01-01

Abstract:In order to improve the adhesion of aromatic fluorocarbon coatings,tetraallyl biphenyl diphenol (TABP), bisphenol A and decafluorobiphenyl were used as starting materials to prepare fluorinated poly (arylene ether)s (FPAEs)through room temperature polycondensation. After that,3-mercaptopropionic acid was grafted to achieve carboxylated fluorinated poly (arylene ether)s (CFPAEs). The carboxyl content of the products was adjusted by changing the loading amount of TABP. The CFPAE coatings were prepared by spraying the polymer solutions in 1-methyl-2-pyrrolidinone(NMP)onto tinplate. It has been found that the CFPAE coatings have excellent thermal stability and mechanical strength. The introduction of carboxyl groups could significantly improve the adhesion of the fluorocarbon coating. When the carboxyl content is 0.265 mmol/g,the adhesion level of the coating is 0,the pencil hardness is 6H,the minimum shaft rod diameter without coating damage is 0.5 mm,and the water contact angle is 103.9 degrees. In addition,the CFPAE coatings also have excellent acid resistance,salt resistance,anti-ultraviolet aging and anti-corrosion properties. Therefore,the carboxylation is an effective way to expand the application of fluorinated poly (arylene ether)s to aromatic fluorocarbon coatings.