Abstract:Modern gas turbine rotors are usually designed as combined rotors in which disks are tied together by one central tie rod or several tie rods distributed along the circumference. This structure has the advantages in cooling design, light weight and processing assembly, however it brings some problems and challenges in predicting the dynamic characteristics of rotor.No matter how many tie rods are used to fasten the disks, the rotor is not an integral or continuous structure any more. The contact effects between contact faces and the pretightening forces of tie rods have great influence on the rotor's dynamic behaviors. Traditional methods to calculate the critical speed in rotor dynamics such as Transfer Matrix Method and 2D Finite Element Method (FEM), based on the integral and continuous rotor, fail to consider factors of the contact effects and the pre-tightening forces of tie rods. Although the 3-D FEM can exactly calculate the critical speed, it is still time and resource consuming to establish and calculate such complex three-dimensional structures, even on the most advanced computers at present.In this paper, the traditional 2-D FEM is improved by considering the contact effects and pre-tightening forces of tie rods. Contact faces in the rotor are dealt as elements with equivalent stiffness but without mass, thus the rotor-bearing system of gas turbine are composed of contact elements, elastic elements, rigid disk elements and bearing elements. According to the improved 2-D FEM, a program is developed to calculate the critical speed and unbalance response of gas turbine rotors. The equivalent stiffness, serving as an important input parameter in the program and elements in the stiffness matrix of the system, is mainly determined by the contact stiffness between contact faces and the pre-tightening force. To find out relationships between them, GW (Greenwood and Williamson) statistical model is used and the equivalent stiffness of complex contact faces is obtained.According to the results, certain curves showing the relationship between equivalent stiffness of contact surface and pre-tightening force are obtained. By these curves and the program, we can easily calculate the dynamic characteristics of gas turbine rotors with satisfying accuracy and less time. To validate this method, the critical speed of a real rotor of a certain gas turbine was calculated with the program and curves, and the results agree well with the measured data.

Analysis of Torsional Dynamic Characteristics of Turbo-Generator Rotor Based on Cross Scale Modeling Method

Analytical Kinetic Model for Accurate Square-slot Stator Natural Frequency Prediction

Analysis of Flexural and Torsional Vibration for Turbogenerator Shafts on Power Impact

The Influence of Ring-Speed Ratio Dynamic Change on Nonlinear Vibration Response of High-Speed Turbocharger Rotor System

MODELING AND CALCULATION OF THE NATURAL FREQUENCY OF 300 MW URBO-GENERATOR ROTOR SHAFT SYSTEM

Analysis Of Dynamic Characteristics Of Gas Turbine Rotor Considering Contact Effects And Pre-Tightening Force

Multi-scale Contact Induced Period-Doubling Vibrations in Rotor Systems: Numerical and Experimental Studies

Dynamical characteristics and influencing factors of stator end-windings of a turbine generator analyzed via heterogeneous element fusion modeling

Investigation of Weight Effects on the Critical Speed of Inclined Turbocharger Rotor System

Dynamical Analysis On Circumferential Rod Fastening Rotor System In Heavy-Duty Gas Turbine

An Investigation On Dynamic Characteristics Of A High Speed Rotor With Complex Structure For Microturbine Test Rig

Dynamic modeling of GTF star gear-rotor coupling system considering structural flexibility

Dynamic Modeling and Experimental Modal Analysis for the Central Rod-Fastened Rotor With Hirth Couplings Based on Fractal Contact Theory

DYNAMIC ANALYSIS OF A HYDRAULIC TURBINE UNIT*

Dynamic Modeling and Analysis of Wind Turbine Drivetrain Considering the Effects of Non-Torque Loads

Research on Dynamic Characteristics of Complex Gap Combined Rotor of Large Generator

Effects of Contact Interfaces on Rotor Dynamic Characteristics of Heavy-Duty Gas Turbine Generator Set

Static and Dynamic Stress of the Combined Rotor with Curvic Couplings Considering the Rough Three-Dimensional Interface at Extreme Operating Conditions

Dynamic modeling and feature analysis of wind turbine with variable ratio gearbox

Study On Structural Optimization Of Large Power Steam Turbine High Pressure Rotor Based On Thermal-Structural Coupling Analysis

Coupled Bending and Torsional Vibrations of Geared Rotor System