Abstract:In off-axis subapertures of most convex aspheres, astigmatism and coma dominate the aberrations with approximately quadratic and linear increase as the off-axis distance increases. A pair of counter-rotating computer generated hologram (CGH) plates is proposed to generate variable amount of Zernike terms Z4 and Z6, correcting most of the astigmatism and coma for subapertures located at different positions on surfaces of various aspheric shapes. The residual subaperture aberrations are then reduced within the vertical range of measurement of the interferometer, which enables near-null test of aspheres flexibly. The alignment tolerances for the near-null optics are given with optomechanical analysis. Accordingly a novel design for mounting and aligning the CGH plates is proposed which employs three concentric rigid rings. The CGH plate is mounted in the inner ring which is supported by two couples of ball-end screws in connection with the middle ring. The CGH plate along with the inner ring is hence able to be translated in X-axis and tipped by adjusting the screws. Similarly the middle ring is able to be translated in Y-axis and tilted by another two couples of screws orthogonally arranged and connected to the outer ring. This design is featured by the large center-through hole, compact size and capability of four degrees-of-freedom alignment (lateral shift and tip-tilt). It reduces the height measured in the direction of optical axis as much as possible, which is particularly advantageous for near-null test of convex aspheres. The CGH mounts are then mounted on a pair of center-through tables realizing counter-rotation. Alignment of the interferometer, the CGHs, the tables and the test surface is also discussed with a reasonable layout of the whole test system. The interferometer and the near-null optics are translated by a three-axis stage while the test mirror is rotated and tilted by two rotary tables. Experimental results are finally given to show the near-null subaperture test capability of the system for a convex even asphere.

Near-null interferometric test of aspheric cylinders utilizing a partial null lens

Non-null interferometric aspheric testing with partial null lens and reverse optimization

Study on testing larger asphericity in non-null interferometer - art. no. 68340T

Non-null Testing of the Aspheric Surface Using a Quadriwave Lateral Shearing Interferometer

Non-null Annular Subaperture Stitching Interferometry for Aspheric Testing

Near-null Interferometry Using an Aspheric Null Lens Generating a Broad Range of Variable Spherical Aberration for Flexible Test of Aspheres.

Research of precision interference locating method for a partial null compensator at aspheric testing

Retrace Error Correction for Non-Null Testing of Optical Aspheric Surface

Aspheric and Free-Form Surfaces Test with Non-Null Sub-Aperture Stitching

The Wavefront Aberration Analysis and Testing Accuracy Evaluation for the Large Aberration Aspheric System Based on the Best Fit Sphere

Determination of Aspheric Vertex Radius of Curvature in Non-Null Interferometry

Reverse Optimization Reconstruction of Aspheric Figure Error in a Non-Null Interferometer

The wavefront aberration analysis and testing accuracy evaluation for the large aberration aspheric system based on the best fit sphere - art. no. 68342V

Non-null Interferometric System for General Aspheric Test

Null Test of Aspheric Surface Based on Digital Phase-Shift Interferometer

Optomechanical Design of Near-Null Subaperture Test System Based on Counter-Rotating CGH Plates

Aspheric Test Combining Front and Back Null Compensation for Infinite Optical Path

New Interferometric Method to Locate Aspheric in the Partial Null Aspheric Testing System

Flexible interferometric null testing for concave free-form surfaces using a hybrid refractive and diffractive variable null.

Measurement of steep aspheric surfaces using improved two-wavelength phase-shifting interferometer

Interferometric Cross Test Of A Convex Even Asphere