Abstract:The main objective of this work is to present a new particle unresolved 3D-1D DEM-CFD-based model enabling predictions of a new steam methane reforming (SMR) driven by the direct electrical current. The main feature of this technology is the use of metal particles heated by the Joule heat resulting from direct electrical current flowing through metal particles in order to heat the gas phase and catalyst particles (Ni/ α -Al2O) to sustain endothermic chemical reactions. The model uses six gaseous chemical species (CH4, CO2, CO, H2O, H2, N 2 ) in the gas phase inside the catalyst. The Langmuir–Hinshelwood-Hougen-Watson (LHHW) kinetics is used. The distinguishing feature and the novelty of the model presented in this work consist in the calculation of the 3D distribution of the electric field inside non mono-disperse fixed beds. The electric field distribution is used to calculate the Joule heating term for each electrically conducting particle participating in the electrical current flow. Additionally, the new model predictions are compared with alternative models based on the chemical equilibrium principles. The models have been numerically solved using MATLAB. To illustrate the performance of the models and to check the feasibility of a new electrical steam methane reforming concept, we consider a cylindrical electrically insulated tube with a diameter of 0.1 m and a height of 0.5 m, which is filled with metal particles and catalyst particles with diameters of 5 mm and 2 mm, respectively. Parametric runs for different flow rates from 0.0025 kg/s to 0.01 kg/s and electrical power from 6.9 kW to 39 kW have been carried out. Results of simulations showed that an increase in the flow rate value ( m ̇ ) by keeping constant input electrical power leads to a decrease in the conversion of CH 4 proportionally to m ̇ - 1 / 2 . A linear increase in the flow rate and input power leads to a decrease in methane conversion. When the input electrical power is increased, the difference between catalyst particle temperature and gas temperature decreases.

Steam reforming of methane in a gliding arc discharge reactor to produce hydrogen and its chemical kinetics study

Dual-enhanced steam methane reforming by membrane separation of H2 and reactive sorption of CO2

The Coupling Performance During Reactive Sorption Enhanced Reforming (reser) Process: Simulation and Experimental Studies

The calculation and experimental study of reactive sorption enhanced steam reforming of modeled biogas for hydrogen production

Exergy analysis and CO2 emission evaluation for steam methane reforming

Progress on Reforming of Carbon Dioxide and Methane to Synthesis Gas by Thermal Plasma

Mechanism study on gliding arc (GA) plasma reforming: Reaction and energy pathways for H 2 production from methanol steam reforming

Plasma Assisted Dry Methane Reforming Using Gliding Arc Gas Discharge: Effect of Feed Gases Proportion

Study of the dry methane reforming process using a rotating gliding arc reactor

Mechanism study on gliding arc (GA) plasma reforming: A combination approach of experiment and modeling

GLIDING ARC DISCHARGE PLASMA ASSISTED REFORMING OF METHANE INTO HYDROGEN WITH OXYGEN AND WATER VAPOR

Plasma Activation of Methane for Hydrogen Production in a N2 Rotating Gliding Arc Warm Plasma: A Chemical Kinetics Study

Insights into n-dodecane steam reforming in gliding arc discharge plasma with experiment and kinetic model

Carbon Dioxide Reforming of Methane to Syngas by Thermal Plasma

Ethanol Partial Oxidative Reforming in Gliding Arc Discharge Plasma: A Better Understanding by a Kinetic Model Study

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

Steam methane reforming driven by the Joule heating

Reaction mechanism explorations on non-thermal plasma reforming of CO2-CH4 by combining kinetics modeling and emission spectroscopy measurements

Conversion of Coalbed Methane Surrogate into Hydrogen and Graphene Sheets Using Rotating Gliding Arc Plasma

Chemical Insights into Plasma-Assisted Dry Reforming of Methane in a Nanosecond Discharge

On the Modeling of Steam Methane Reforming