Abstract:The incorporation of supplementary cementitious materials (SCMs) in concrete can improve the properties of concrete partially immersed in salt solution. However, the current partial immersion environment only considers the capillary action above the still water level, does not consider the capillary action above the fluctuating water level in dry-wet cycling environment. In this paper, a series of indoor exposure experiments were carried out to investigate the effects of incorporating polynary SCMs including fly ash (FA), ground granulated blast furnace slag (GGBFS) and silica fume (SF) on the sulfate resistance and chloride impermeability of concrete considering the capillary action above the fluctuating water level in dry-wet cycling environment. A total of 15 groups of concrete with different mix proportions (total 150 concrete specimens) were designed to study the effects of different replacement levels of polynary SCMs on concrete properties. The effects of incorporating polynary SCMs on the chloride impermeability of concrete above and in the fluctuating water level zone were investigated. The scanning electron microscope (SEM), x-ray diffraction (XRD) and mercury intrusion porosimetry (MIP) tests were used to analyze the microstructure of concrete. The results indicate that when concrete is incorporated with polynary SCMs and subjected to capillary action above the fluctuating water level, the compressive strength and chloride impermeability first increase and then decrease with the increase of FA content; the compressive strength and chloride impermeability decrease with the increase of GGBFS content; the compressive strength first increase and then decrease with the increase of SF content, and the chloride impermeability increase with that. The transport process of chloride in concrete above the fluctuating water level zone includes the longitudinal transport under capillary action and the transverse transport under concentration gradient action. The combined effects of both cause the higher chloride concentration in concrete above the fluctuating water level zone. Comprehensively considering the influence of different mix proportions on the sulfate resistance and chloride impermeability of concrete, it is determined that 20% FA + 5% SF is the optimal replacement level with the excellent performance considering the capillary action above the fluctuating water level in dry-wet cycling environment.

Experimental and Simulation Study of Water Absorption in Unsaturated Concrete

Experimental study on the capillary absorption of cement-based materials and analysis of influencing factors

Water Absorption Behaviour of Concrete: Novel Experimental Findings and Model Characterization

An Experimental Study on Relationship among Water Sorptivity, Pore Characteristics, and Salt Concentration in Concrete

Capillary Suction Induced Water Absorption and Chloride Transport in Non-Saturated Concrete: the Influence of Humidity, Mineral Admixtures and Sulfate Ions

Experiment Study on Capillary Absorption of Fly Ash Concrete at Different Curing Ages

Water Transport Behavior of Concrete: Boundary Condition and Water Influential Depth

Factors Influencing the Capillary Water Absorption Characteristics of Concrete and Their Relationship to Pore Structure

Modeling the dependence of capillary sorptivity on initial water content for cement-based materials in view of water sensitivity

STUDY ON WATER ABSORPTION MODEL OF AIR-ENTRAINING CONCRETE UNDER NATURAL CONDITIONS

Quantitative study on the influence of fly ash content, saturation degree and interface transition zone on the permeability of cement-based materials

Numerical and Experimental Study of Moisture and Chloride Transport in Unsaturated Concrete

Water Transport in Unsaturated Cracked Concrete under Pressure

Advanced Moisture Control in Porous Aggregates for Improved Lightweight High-Performance Concrete

Effects of incorporating polynary SCMs on sulfate resistance and chloride impermeability of concrete considering capillary action in dry-wet cycling environment

Numerical Simulation of Water Transport in Unsaturated Recycled Aggregate Concrete

Research on Appropriate Content of Super Absorbent Polymer Added of Marine Concrete

Prediction of Elastic Modulus and Poisson’s Ratio for Unsaturated Concrete

Uniform Model for Moisture Transport in Porous Materials and Its Application to Concrete at Selected Chinese Regions

Experimental analysis on the relationship between pore structure and capillary water absorption characteristics of cement‐based materials

Investigation of the water absorption of porous aggregates from cement paste by electrical resistivity measurement