Abstract:The Ni-rich layered cathode material LiNi0.8Co0.1Mn0.1O2 presents a high specific capacity and relatively low cost, however, the inherent structure instability during the electrochemical cycling process hinders its application widely. Universally, the strategy of surface coating can be used to improve the structural stability of the material and then improve its electrochemical performance. This work combines the high-speed solid-phase coating method and the high-temperature sintering method to coat the electronic conductor antimony tin oxide and lithium-ion conductor lithium metaphosphate on the surface of the LiNi0.8Co0.1Mn0.1O2 material, respectively. The electron/ion conductor double coating layer forms a charge conversion and transport channel on the surface of the LiNi0.8Co0.1Mn0.1O2. The electronic conductivity of the double-coated LiNi0.8Co0.1Mn0.1O2 material increased from 2.17x10(-3) S.cm(-1) to 1.02x10(-2) S.cm(-1), and the diffusion coefficient of lithium-ion also increased from 7.05x10(-9) cm(2).s(-1) to 2.88x10(-8) cm(2).s(-1). At the same time, due to strong P-O bonds and stable metal oxides, the double-coating layer on the surface of the LiNi0.8Co0.1Mn0.1O2 material can effectively restrain the irreversible phase transitions, and it also can inhibit the interfacial reactions under high electrode potential. The electrochemical performance test demonstrated that the cyclability and rate performance of LiNi0.8Co0.1Mn0.1O2 material improved due to surface modification. The cathode assembled with double-coated LiNi0.8Co0.1Mn0.1O2 material can maintain a reversible capacity of 161.1 mAh.g(-1) after 150 cycles at 1 C (after being activated at 0.1 C for two cycles, 1 C=180 mA.g(-1)) during 2.7 similar to 4.3 V ( vs. Li/Li+), with a capacity retention of 87.1%. This coated LiNi0.8Co0.1Mn0.1O2 material also displays a specific capacity as high as 133 mAh.g(-1) at 10 C. In comparison, the pristine LiNi0.8Co0.1Mn0.1O2 delivers a capacity of only 113 mAh.g(-1) after 100 cycles and a reversible capacity retention rate of less than 60% (a decay rate of 0.4% per cycle).

Electron/ion Conductor Double-coated LiNi0.8Co0.1Mn0.1O2 Li-ion Battery Cathode Material and Its Electrochemical Performance

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Enhanced electrochemical performance of Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 cathode material coated with Li + -conductive Li 2 SiO 3 for lithium ion batteries

Constructing Electronic and Ionic Conductive Double Coating to Achieve Superior Structure Stability and Electrochemical Properties of LiNi0.90Co0.04Mn0.03Al0.03O2

Double Conductor Coating to Improve the Structural Stability and Electrochemical Performance of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode Material

A Nickel-Rich Oxide, Li(Ni0.90Co0.06Mn0.04)0.995Al0.005 O2, with a Dual Conductive Coating

Lithium Ion Conductor and Electronic Conductor Co-Coating Modified Layered Cathode Material Lini1/3mn1/3co1/3o2

Double Conductor Coating to Improve the Structural Stability and Electrochemical Performance of LiNi0.8Co0.1Mn0.1O2 Cathode Material

Lithium-conductive LiNbO3 Coated High-Voltage LiNi0.5Co0.2Mn0.3O2 Cathode with Enhanced Rate and Cyclability

Effect of Nb5+ Doping and LiNbO3 Coating on the Structure and Surface of a LiNi0.8Mn0.2O2 Cathode Material for Lithium-Ion Batteries

Improving electrochemical performance of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode for Li-ion batteries by dual-conductive coating layer of PPy and LiAlO2

Effect of Nb 5+ Doping and LiNbO 3 Coating on the Structure and Surface of a LiNi 0.8 Mn 0.2 O 2 Cathode Material for Lithium-Ion Batteries

Interphase Modification of Li(Ni0.5Co0.2Mn0.3)O2 Based Lithium Battery Electrode Materials by Depolarized and Pre-Lithiation for High Capacity and Cycling Performance

Realizing the Single-Crystalline LiNi 0.90 Mn 0.05 Co 0.05 O 2 Cathode with Long-Life and High-Safety Property Driven by Polysiloxane Covering and PO43- Doping

Improving rate capacity and cycling performance of lithium-rich high-Mn Li-1.8[Mn0.7Co0.15Ni0.15]O-2.675 cathode materials by Li2SiO3 coating

High structure stability and Li-conduction of LiNi0.8Co0.1Mn0.1O2 cathode co-coated by Al2O3 and LiNbO3 for high performance lithium-ion battery

Effect of carbon coating on electrochemical performance of Li 1.048 Mn 0.381 Ni 0.286 Co 0.286 O 2 cathode material for lithium-ion batteries

Li2O-B2O3-Li2SO4 Modified LiNi1/3Co1/3Mn1/3O2 Cathode Material for Enhanced Electrochemical Performance

In-situ TiO2/reduced Graphene Oxide Double-Coated LiNi0.5Co0.2Mn0.3O2 Microspheres As High-Performance Li-ion Cathode Materials

Optimized Ni-rich LiNi0.83Co0.06Mn0.06Al0.05O2 cathode material with a Li1.3Al0.3Ti1.7(PO4)3 fast ion conductor coating for Lithium-ion batteries

In-situ TiO2/reduced Graphene Oxide Double-Coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 Microspheres As High-Performance Li-ion Cathode Materials