Abstract:In this article, the original Li1.2Mn0.54Ni0.13Co0.13O2 lithium-rich manganese-based cathode material with a uniform distribution of polygonal prisms was synthesized by a simple and reproducible sol-gel method, followed by a simple chemical deposition method. The structure and electrochemical performance of the original and modified cathode materials were characterized by XRD, XPS, EDS, SEM, TEM, and constant current charge/discharge tests. The results showed that LaF3 was uniformly coated on the surface of the original material and the thickness of the 2 wt% coating layer was about 2-3 nm. With this coating amount, the cathode material could obtain the best cycling and rate performance. The first coulomb efficiency of the modified material was 73%, which was 7% higher than that of the original material. Secondly, the cycling performance was improved. When the coated material was cycled at 0.2 C for 50 cycles, the discharge capacity was 325mAh∙g-1, and the capacity retention rate was 99.21%, while the original material was only 78.73%. Finally, the performance was also improved at high current density. The coated material could still reach 170mAh∙g-1 at 5C, which was 70% higher than the original material. The significant improvement in electrochemical performance was attributed to the fact that the LaF3 coating layer made the material avoid direct contact with the electrolyte which could reduce the occurrence of side reactions and increase the stability of the material. Besides, expanded layer space resulted from lattice expansion after coating could broaden the transmission channel of lithium ions and facilitate the insertion-extraction of lithium ions during charge and discharge.

Lithium Ion Conductor and Electronic Conductor Co-Coating Modified Layered Cathode Material Lini1/3mn1/3co1/3o2

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Enhanced electrochemical performance of Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 cathode material coated with Li + -conductive Li 2 SiO 3 for lithium ion batteries

Layered/Layered Homostyructure Ion Conductor Coating Strategy for High Performance Lithium Ion Batteries

Enhancing Electrochemical Performance of LiNi0.6Co0.2Mn0.2O2 by Lithium-ion Conductor Surface Modification

A Nickel-Rich Oxide, Li(Ni0.90Co0.06Mn0.04)0.995Al0.005 O2, with a Dual Conductive Coating

Enhanced Electrochemical Performance of Li1.2mn0.54ni0.13co0.13o2 Cathode with an Ionic Conductive Livo3 Coating Layer

Effect of carbon coating on electrochemical performance of Li 1.048 Mn 0.381 Ni 0.286 Co 0.286 O 2 cathode material for lithium-ion batteries

Li1.2Ni0.13Co0.13Mn0.54O2 of Al2O3-coating Cathode for High-Performance Lithium-Ion Batteries

Double Conductor Coating to Improve the Structural Stability and Electrochemical Performance of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode Material

Synthesis and Electrochemical Properties of Co,Mn-Coated Linio2 Lithium-Ion Battery Cathode Materials

Double Conductor Coating to Improve the Structural Stability and Electrochemical Performance of LiNi0.8Co0.1Mn0.1O2 Cathode Material

Improved Electrochemical Performances of Li- and Mn-Rich Layered Oxides 0.4li4/3mn2/3o2·0.6lini1/3co1/3mn1/3o2 Cathode Material by Co3O4 Coating

Improving rate capacity and cycling performance of lithium-rich high-Mn Li-1.8[Mn0.7Co0.15Ni0.15]O-2.675 cathode materials by Li2SiO3 coating

Structure and electrochemical performance of cobalt oxide layer coated on LiNi0.03Mn1.97O4 cathode materials

Facile Synthesis and Enhanced Electrochemical Performances of Li2tio3-Coated Lithium-Rich Layered Li1.13ni0.30mn0.57o2 Cathode Materials for Lithium-Ion Batteries

Improved Electrochemical Performance of LaF3-coated Layered Oxide Li1.2Mn0.54Ni0.13Co0.13O2 Cathode Material for Lithium- Ion Batteries Prepared by Sol-Gel Method

Li2O-B2O3-Li2SO4 Modified LiNi1/3Co1/3Mn1/3O2 Cathode Material for Enhanced Electrochemical Performance

In-situ TiO2/reduced Graphene Oxide Double-Coated LiNi0.5Co0.2Mn0.3O2 Microspheres As High-Performance Li-ion Cathode Materials

Optimized Ni-rich LiNi0.83Co0.06Mn0.06Al0.05O2 cathode material with a Li1.3Al0.3Ti1.7(PO4)3 fast ion conductor coating for Lithium-ion batteries

Li7La3Zr2O12 coated LiNi0.87Co0.05Mn0.05Al0.03O2 for lithium-ion cells with enhanced performance