Abstract:Physically Unclonable Functions (PUFs) have proved to be an effective and low-cost measure against counterfeiting by providing device authentication and secure key storage services. Memory-based PUF implementations are an attractive option due to the ubiquitous nature of memory in electronic devices and the requirement of minimal (or no) additional circuitry. Dynamic Random Access Memory-- (DRAM) based PUFs are particularly advantageous due to their large address space and multiple controllable parameters during response generation. However, prior works on DRAM PUFs use a static response-generation mechanism making them vulnerable to security attacks. Further, they result in slow device authentication, are not applicable to commercial off-the-shelf devices, or require DRAM power cycling prior to authentication. In this article, we propose D-PUF, an intrinsically reconfigurable DRAM PUF based on the idea of DRAM refresh pausing. A key feature of the proposed DRAM PUF is reconfigurability, that is, by varying the DRAM refresh-pause interval, the challenge-response behavior of the PUF can be altered, making it robust to various attacks. The article is broadly divided into two parts. In the first part, we demonstrate the use of D-PUF in performing device authentication through a secure, low-overhead methodology. In the second part, we show the generation of true random numbers using D-PUF. The design is implemented and validated using an Altera Stratix IV GX FPGA-based Terasic TR4-230 development board and several off-the-shelf 1GB DDR3 DRAM modules. Our experimental results demonstrate a 4.3×-6.4× reduction in authentication time compared to prior work. Using controlled temperature and accelerated aging tests, we also demonstrate the robustness of our authentication mechanism to temperature variations and aging effects. Finally, the ability of the design to generate random numbers is verified using the NIST Statistical Test Suite.

Reconfigurable and Dynamically Transformable In-Cache-MPUF System with True Randomness Based on the SOT-MRAM

STT-MRAM-Based Reliable Weak PUF

High-Speed and Reconfigurable Physical Unclonable Functions Based on SOT-MTJ Array

A Reconfigurable Arbiter PUF Based on STT-MRAM

Experimental Demonstration of Dual-Mode PUF/Memory Based on SOT-MRAM Array

Physical Unclonable Function Chip based on SOT-MRAM in 180 nm CMOS Technology

D-PUF: An Intrinsically Reconfigurable DRAM PUF for Device Authentication and Random Number Generation.

A Reconfigurable and Machine Learning Attack Resistant Strong PUF Based on Arbiter Mechanism and SOT-MRAM.

A Highly Reliable and Tamper-Resistant RRAM PUF: Design and Experimental Validation.

A Highly Reliable RRAM Physically Unclonable Function Utilizing Post-Process Randomness Source

A Novel PUF Using Stochastic Short-Term Memory Time of Oxide-Based RRAM for Embedded Applications

A High Area-Efficiency RRAM-Based Strong PUF with Multi-Entropy Source and Configurable Double-Read Process

An Ultracompact Switching-Voltage-Based Fully Reconfigurable RRAM PUF with Low Native Instability

A Reconfigurable SRAM CRP PUF with High Reliability and Randomness

Reliability Analysis and Performance Evaluation of STT-MRAM-Based Physical Unclonable Function

A Reconfigurable Arbiter MPUF With High Resistance Against Machine Learning Attack

25.2 A Reconfigurable RRAM Physically Unclonable Function Utilizing Post-Process Randomness Source with <6×10−6 Native Bit Error Rate

A Modeling Attack Resilient Physical Unclonable Function Based on STT-MRAM

A Unified Memory and Hardware Security Module Based on the Adjustable Switching Window of Resistive Memory

R^3PUF: A Highly Reliable Memristive Device Based Reconfigurable PUF

Reconfigurable Physical Unclonable Cryptographic Primitives Based on Current-Induced Nanomagnets Switching