Abstract:Localized CO2 laser repairing of surface damage on fused silica optics has been successfully applied in high-power laser system in the field of controllable nuclear fusion. In order to accurately predict the surface topography evolution and to reveal the intrinsic physical mechanism during the process of laser mitigation, experiments of localized CO2 laser mitigation were firstly carried out to analyze the features of mitigated craters under different laser powers. Then a multi-physics coupled mathematical model was developed based on the fluid control equation, heat and mass transfer equation and material phase transition kinetics to investigate the thermodynamic and kinetic behaviors of laser interaction with silica. The model considered the effects of Marangoni convection, gravity, capillary force and vaporization recoil pressure, as well as the nonlinear variation of physical parameters of silica material with respect to temperature. The results showed that with the increase of laser power, the material ablation and the appearance of raised rim occurred simultaneously. The depth of the mitigated crater increased sharply when the threshold for material ablation was attained, while the lateral dimension increased linearly. The vaporization recoil pressure was found to be the dominant factor for the formation of Gaussian crater with the raised rim feature. The capillary force caused the material at the edge of the molten pool to have a tendency to reflow after laser shutting down, but it was too small to change the surface topography. This work could significantly contribute to the understanding of laser mitigation process, which laid the foundation for the accurate prediction and evaluation of surface quality of CO2 laser repaired fused silica surface.

Numerical Simulation of Micro-Flow Surface Smoothing of Fused Silica by CO2 Laser

Modeling and Analysis of Surface Roughness in Fused Silica by CO2 Laser Smoothing

The Influence of Laser Beam Shaping on Surface Roughness, Surface Figure and Mid-Spatial Frequency of Fused Silica Glass in CO2 Laser Smoothing

Numerical and Experimental Investigation of Morphological Modification on Fused Silica Using CO2 Laser Ablation

Formation Mechanism of Surface Morphology in the Process of CO2 Pulsed Laser Processing of Fused Silica Optics

Coupled Thermal-Mechanical Analysis of CO<sub>2</sub> Laser Irradiation on Fused Silica

Experimental and Theoretical Investigation of Localized CO2 Laser Interaction with Fused Silica During the Process of Surface Damage Mitigation

Micron-scale Modifications Ofsisurface Morphology by Pulsed-Laser Texturing

Toward Little Heat-Affected Area of Fused Silica Materials Using Short Pulse and High Power CO2 Laser

Numerical Simulation of Surface Topography Evolution During Pulsed CO2 Laser Ablation of Fiber

Physical Mechanism of Pulsed Laser Interaction with Fused Silica Optics During CO2 Laser Mitigation Process

Modeling of Surface Damage Mitigation in Fused Silica with Carbon Dioxide Laser

Morphology evolution mechanisms and localized structural modification of repaired sites on fused silica optics processed by CO2 laser rapid ablation mitigation

Formation Mechanism of a Smooth, Defect-Free Surface of Fused Silica Optics Using Rapid CO2 Laser Polishing

Evolution Regularity of Continuous Surface Structures Shaped by Laser-Supported Fictive-Temperature Modifying

Role of Fictive Temperature Distribution Involved in CO2 Laser Polishing of Fused Silica and Its Optimization for Achieving Even Heat-Affected Zones

Irradiation Effects of CO2laser Parameters on Surface Morphology of Fused Silica

Theoretical and experimental investigations in thermo-mechanical properties of fused silica with pulsed CO2 laser ablation

Influence of surface morphology on processing of C/SiC composites via femtosecond laser

Numerical Simulation of Modulation to Incident Laser by Submicron to Micron Surface Contaminants on Fused Silica

Numerical Simulation of Thermal Effect in Fused Silica Irradiated by Nanosecond High Repetition Rate Laser