Abstract:In order to overcome the drawbacks of traditional rehabilitation method, the robot-aided rehabilitation has been widely investigated for the recent years. And the hand rehabilitation robot, as one of the hot research fields, remains many challenging issues to be investigated. This paper presents a new hand exoskeleton system with some novel characteristics. Firstly, both active and passive rehabilitative motions are realized. Secondly, the device is elaborately designed and brings advantages in many aspects. For example, joint motion is accomplished by a parallelogram mechanism and high level motion control is therefore made very simple without the need of complicated kinematics. The adjustable joint limit design ensures that the actual joint angles don’t exceed the joint range of motion (ROM) and thus the patient safety is guaranteed. This design can fit to the different patients with different joint ROM as well as to the dynamically changing ROM for individual patient. The device can also accommodate to some extent variety of hand sizes. Thirdly, the proposed control strategy simultaneously realizes the position control and force control with the motor driver which only works in force control mode. Meanwhile, the system resistance compensation is preliminary realized and the resisting force is effectively reduced. Some experiments were conducted to verify the proposed system. Experimentally collected data show that the achieved ROM is close to that of a healthy hand and the range of phalange length (ROPL) covers the size of a typical hand, satisfying the size need of regular hand rehabilitation. In order to evaluate the performance when it works as a haptic device in active mode, the equivalent moment of inertia (MOI) of the device was calculated. The results prove that the device has low inertia which is critical in order to obtain good backdrivability. The experiments also show that in the active mode the virtual interactive force is successfully feedback to the finger and the resistance is reduced by one-third; for the passive control mode, the desired trajectory is realized satisfactorily.

Fusing Topology Optimization and Pseudo-Rigid-Body Method for the Development of a Finger Exoskeleton

Developing of A Rigid-Compliant Finger Joint Exoskeleton Using Topology Optimization Method

Design and Simulation Experiment of Rigid-Flexible Soft Humanoid Finger

Design and Development of a Hand Exoskeleton for Rehabilitation of Hand Injuries

Design and Prototyping of an Underactuated Hand Exoskeleton With Fingers Coupled by a Gear-Based Differential

Design of a Compact Finger-Integrated Mechanism with Robust Kinematics for Hand Exoskeleton

Design and Kinematic Optimization of a Novel Underactuated Robotic Hand Exoskeleton

A Design of Hand Rehabilitation Exoskeleton Mechanism Adapted to Different Finger Lengths.

Design and Characterization of a Rolling-Contact Involute Joint and Its Applications in Finger Exoskeletons

Optimal Design of a Bilateral Stand-Alone Robotic Motion-Assisted Finger Exoskeleton for Home Rehabilitation

Development of a Hand Exoskeleton System for Index Finger Rehabilitation

Design and Characterization of a High-performance Wearable Robot Using Symmetric Conjugate Surface Joints

A hand exoskeleton using a multi-segment mechanism with two degrees-of-freedom for each finger

Finger Exoskeleton for Rehabilitation of Finger Extension and Flexion by Multi-Segment Mechanism

A Biomimetic Tendon-driven Soft Hand Exoskeleton for Finger Extension based on Musculoskeletal and Biomechanical Principles.

Design, Modeling and Experiments of a Modular Robotic Finger

Design of a wearable hand exoskeleton for exercising flexion/extension of the fingers

Design of Rehabilitation Hand Exoskeleton System for Injured Fingers

A Novel Robotic Exoskeleton for Finger Rehabilitation: Kinematics Analysis

Characterization and Evaluation of A Cable-Actuated Flexible Hand Exoskeleton

An original hybrid-architecture finger mechanism for wearable hand exoskeletons