Abstract:Usability and functionality are important when designing hand-wearable robots; however, satisfying both indicators remains a challenging issue, even though researchers have made important progress with state-of-the-art robot components. Although hand-wearable robots require sufficient actuators and sensors considering their functionality, these components complicate the robot. Further, robot compliance should be carefully considered because it affects both indicators. For example, a robot's softness makes it compact (improving usability) but also induces inaccurate force transmission (impacting functionality). To address this issue, we present in this paper a tendon-driven, hybrid, hand-wearable robot, named Exo-Glove Shell. The proposed robot assists in three primitive motions (i.e., thumb opposition motion, which is known as one of the most important hand functions, and flexion/extension of the index/middle fingers) while employing only four actuators by using an under-actuation mechanism. The Exo-Glove Shell was designed by combining a soft robotic body with rigid tendon router modules. The use of soft garments enables the robot to be fitted well to users without customization or adjustment of the mechanisms; the metal routers facilitate accurate force transmission. User tests conducted with an individual with a spinal cord injury (SCI) found that the robot could sufficiently and reliably assist in three primitive motions through its four actuators. The research also determined that the robot can assist in various postures with sufficient stability. Based on the grasp stability index proposed in this paper, user stability-when assisted by the proposed robot-was found to be 4.75 times that of an SCI person who did not use the Exo-Glove Shell.

Design of a wearable hand exoskeleton for exercising flexion/extension of the fingers

A Design of Hand Rehabilitation Exoskeleton Mechanism Adapted to Different Finger Lengths.

Optimal Design of a Bilateral Stand-Alone Robotic Motion-Assisted Finger Exoskeleton for Home Rehabilitation

Design of A Hand Exoskeleton Rehabilitation Device

Fusing Topology Optimization and Pseudo-Rigid-Body Method for the Development of a Finger Exoskeleton

Design and Modeling of a Bioinspired Flexible Finger Exoskeleton for Strength Augmentation

A hand exoskeleton using a multi-segment mechanism with two degrees-of-freedom for each finger

A Novel Robotic Exoskeleton for Finger Rehabilitation: Kinematics Analysis

Design and Characterization of a Rolling-Contact Involute Joint and Its Applications in Finger Exoskeletons

Mechanical Design and Feasibility of a Finger Exoskeleton to Support Finger Extension of Severely Affected Stroke Patients

Finger Exoskeleton for Rehabilitation of Finger Extension and Flexion by Multi-Segment Mechanism

Development of a Wearable Finger Exoskeleton for Rehabilitation

Characterization and Evaluation of A Cable-Actuated Flexible Hand Exoskeleton

An original hybrid-architecture finger mechanism for wearable hand exoskeletons

Development and evaluation of a hand exoskeleton for finger rehabilitation*

Evaluation of a 1-DOF Hand Exoskeleton for Neuromuscular Rehabilitation

Developing of A Rigid-Compliant Finger Joint Exoskeleton Using Topology Optimization Method

Exo-Glove Shell: A Hybrid Rigid-Soft Wearable Robot for Thumb Opposition with an Under-Actuated Tendon-Driven System

Mechanism Design and Performance Analysis of a Wearable Hand Rehabilitation Robot

Design and experimental testing of a force-augmenting exoskeleton for the human hand

Design, Development, and Control of a Hand/Wrist Exoskeleton for Rehabilitation and Training