Abstract:The effect of both the Fe : Ni ratio (5 to 1 : 1) and the relative Lewis acidity of a metal oxide support on catalytic activity, selectivity and stability was investigated in the CO2 mediated oxidative dehydrogenation of ethane (CO2-ODH). To avoid effects of varying pore sizes, shapes and volumes of the supports, chromia and zirconia overlayers were coated onto a common γ-Al2O3 carrier (CrOx@Al2O3 and ZrOx@Al2O3). Separately, oxidic FexNiy alloy precursor nanoparticles were prepared using a nonaqueous surfactant-free method and deposited by sonication onto the carrier. In comparison to previous studies in the field, this synthesis technique yields closely associated iron and nickel increasing the chances for alloy formation. During reduction, a mixture of a bcc and a fcc alloy phase was formed, with the content of bcc increasing with increasing iron content as predicted by the bulk phase diagram. Upon exposure to carbon dioxide at elevated temperatures, the bcc metallic phase is selectively oxidised to an inverse spinel structure via the dissociation of CO2. When exposed to CO2-ODH conditions, the bare ZrOx@Al2O3 support shows no activity. The presence of FeNi phases increases the conversion of ethane and CO2 marginally (<2%) but forms ethylene at high selectivity (SC2H4 > 80%). The CrOx@Al2O3 support shows some initial activity (XC2H6 < 5%) at very high ethylene selectivity (SC2H4 > 90%) but deactivates with time on stream. Comparison of the ethane and carbon dioxide conversions suggests that direct dehydrogenation rather than the oxidative pathway is taking place. When FeNi particles with the highest Fe content are added, the ethane conversion behavior hardly changes, but the CO2 conversion is increased now supporting the stoichiometric CO2-ODH reaction (SC2H4 > 95%). It is therefore evident that a tandem catalyst system between a reducible oxide carrier and the FeNi species is required. Increasing the Ni content results in an increase in activity and stability while changing the dominant reaction pathway to a combination of dry reforming, CO2-ODH and possibly the reverse Boudouard reaction, with the latter countering catalyst deactivation through carbon deposition.

Superb Ni-foam-structured Nano-Intermetallic InNi3C0.5 Catalyst for Hydrogenation of Dimethyl Oxalate to Ethylene Glycol

Nanoporous Ni3P evolutionarily structured onto a Ni-foam for highly selective hydrogenation of dimethyl oxalate to methyl glycolate.

Efficient and Stable Cu-Ni/ZrO2 Catalysts for in Situ Hydrogenation and Deoxygenation of Oleic Acid into Heptadecane Using Methanol As a Hydrogen Donor

Efficient Hydrogenation of Dimethyl Oxalate to Ethylene Glycol Via Nickel Stabilized Copper Catalysts

Ultra-stable Cu-based catalyst for dimethyl oxalate hydrogenation to ethylene glycol

Significant effect of In doping on Ni/C catalyst for hydrogenation of dimethyl oxalate to ethanol: Synergistic effect of InNi 3 alloy, surface oxygen, and defect sites

Bimetallic nickel molybdenum nitride catalyst with low pressure and reduced hydrogen consumption for hydrogenation of dimethyl oxalate to ethanol: the impact of reduction temperature on catalytic performance

Ni-Modified Ag/SiO2 Catalysts for Selective Hydrogenation of Dimethyl Oxalate to Methyl Glycolate

InNi3C0.5/Fe3O4 catalyst for the CO2 hydrogenation to methanol: Co-precipitation preparation, performance and mechanistic insight

Superior silicon-free Cu catalyst for dimethyl oxalate hydrogenation: Exploring interaction between Cu and pyridinic-N-rich ultrathin carbon

Highly Active and Stable Mixed-Phase In2O3-supported Ni Catalyst for CO2 Hydrogenation to Methanol

Influence of Ni species on the structural evolution of Cu/SiO2 catalyst for the chemoselective hydrogenation of dimethyl oxalate

Highly stable Cu catalyst embedded in N-doped carbon microsphere for hydrogenation of dimethyl oxalate to methyl glycolate

Highly dispersed, ultra-small and noble metal-free Cu nanodots supported on porous SiO2 and their excellent catalytic hydrogenation of dimethyl oxalate to methyl glycolate

Ethylene glycol and ethanol synthesis from dimethyl oxalate hydrogenation on the Cu/ZnO/SiO2 catalysts

Efficient Tuning of Surface Copper Species of Cu/SiO2 Catalyst for Hydrogenation of Dimethyl Oxalate to Ethylene Glycol

Nickel aluminate spinel-derived catalysts for aqueous-phase hydrogenolysis of glycerol with in-situ hydrogen production: Effect of molybdenum doping

Hydration of Ethylene Oxide to Ethylene Glycol over SnO_2-Nb_2O_5/MgAl_2O_4/α-Al_2O_3 Catalyst

Hydration of ethylene oxide to ethylene glycol over SnO2-Nb2O5/MgAl2O4/alpha-Al2O3 catalyst

Ni-In Synergy in CO2 Hydrogenation to Methanol

Supported FexNiy catalysts for the co-activation of CO2 and small alkanes