Abstract:Based on the methods of DRGEP, FSSA, reaction path analysis, and sensitivity analysis, the detailed mechanisms of 1-pentene, 2-pentene, and 2-methyl-2-butene are comprehensively reduced and combined with the mechanisms of TRF, methanol, ethanol, and n-butanol. A reduced mechanism of multi-component is proposed to predict gasoline combustion in the engine. It is rare in previous study about mechanisms of surrogate fuels that used pentene to represent unsaturated hydrocarbons, which is the most abundant olefin in actual gasoline in China. JSR experiments were carried out on the mixed fuels of isooctane/methanol/n-butanol and isooctane/1-pentene with different equivalence ratios under the condition of 1.03 atm and temperature range from 500 K similar to 1000 K, and the component concentration curves were obtained. The accuracy of the multi-component reduced mechanism is verified by JSR experimental data. The results showed that this mechanism could well fit the concentration curve of reactants and final reaction products, and showed the same change trend for intermediate products. The accuracy of the pentene mechanism is verified by the experimental data of ignition delay time and laminar flame velocity. The prediction of the ignition delay time of pentenes is accurate in the middle and high temperature regions, and the prediction in the low temperature region is slightly lower than that of the detailed mechanism, but it can predict the trend of ignition delay time and reflect the low temperature reaction properties of them. The simulated values of 1-pentene can well fit the experimental data of laminar flame velocity under various working conditions, and the difference in laminar flame velocity of three isomerides is also well reflected in this mechanism. The ignition delay time of multi-component mixtures was verified under different pressures by using the mixed fuels of G-A, G-B, and G-C. The results show that this mechanism can predict the ignition delay time of G-A and G-B more accurately under pressure of 20 atm, but the predicted values are lower under 50 atm pressure. Under the pressure of 10 atm, 30 atm, and 50 atm, the ignition delay time of this mechanism can well fit the experimental data of G-C fuel, while the predicted value at low temperature is slightly higher.

Prediction and Measurement of Critical Properties of Gasoline Surrogate Fuels and Biofuels

Measurement of the Critical Temperature and Critical Pressure of Isopropanol and Isobutanol Blended with Gasoline Components

Measurement and Correlation of Critical Properties for Binary Mixtures and Ternary Mixtures Containing Gasoline Additives

Development of a Reduced Four-Component (Toluene/n-Heptane/iso-octane/ethanol) Gasoline Surrogate Model

Measurements of critical properties of ethyl propionate with the gasoline components

Measurement of Critical Temperature and Critical Pressure of Tert-Butanol and Alkane Mixtures

Study on Laminar Combustion Characteristics and the Optimization of the Coupling Mechanism in a Mixture of Propanol and Gasoline

Experimental and Modeling Investigations of Density and Viscosity for the Ternary (N-Octane Plus Ethylcyclohexane Plus Ethylbenzene) Mixtures

Experimental and Modeling Investigations of Density and Viscosity for the Ternary ( N -Octane + Ethylcyclohexane + Ethylbenzene) Mixtures

Determination of critical properties (tc, Pc ) of endothermic hydrocarbon fuels RP-3 and simulated JP-7

Analyses of Surrogate Models for Calculating Thermophysical Properties of Aviation Kerosene RP-3 at Supercritical Pressures

Developing predictive model for the critical properties of fuels containing esters based on the experimental study of methyl butanoate + alcohols + n-alkanes mixtures

Measurement of Critical Properties for Binary and Ternary Mixtures Containing N-Butanol and N-Alkane

Experimental and Numerical Studies on Three Gasoline Surrogates Applied in Gasoline Compression Ignition (GCI) Mode

Experimental Determination of Critical Data of Multi-Component Mixtures Containing Potential Gasoline Additives 2-Butanol by a Flow-Type Apparatus

Autoignition of ternary blends for gasoline surrogate at wide temperature ranges and at elevated pressure: Shock tube measurements and detailed kinetic modeling

An Investigation of Combustion Properties of a Gasoline Primary Reference Fuel Surrogate Blended With Butanol

Experimental and Kinetic Study on Low Temperature Oxidation and Pyrolysis of Iso-Octane and Gasoline

Development of a Reduced Kinetic Chemical Mechanism of Gasoline Surrogate Containing Alcohols and Pentenes

Determination of Critical Properties for Binary and Ternary Mixtures of Short Chain Alcohols and Alkanes Using a Flow Apparatus

Measurements of laminar and turbulent flame propagation of iso-octane/air and iso-cetane/air mixtures at elevated pressures and temperatures