Abstract:This work utilizes a rapid compression machine (RCM) to experimentally quantify autoignition and pre-liminary heat release characteristics for blends of 0 to 30% ethanol by volume into two surrogates (FGF-LLNL and FGF-KAUST) that represent a full boiling range gasoline (FACE-F). Experimental conditions cover pressures from 15 to 100 bar, temperatures from 700 to 1000K, and diluted/stoichiometric and undi-luted/lean fuel loading conditions representative of boosted spark-ignition and advanced compression ignition engines, respectively. Direct comparison is made with previously reported results for FACE-F/E0-E30 blends. A detailed gasoline surrogate chemistry model is also proposed, and chemical kinetic modeling is undertaken using the proposed model to generate chemical insights into the compositional effects and ethanol blending effects. Although experiments show similar qualitative trends between the surrogates, quantitative differences between the surrogates are obvious, where FGF-LLNL displays greater low-temperature reactivity and faster evolution of low-temperature heat release (LTHR) than FGF-KAUST, with such differences being significantly muted by ethanol blending. Flux analyses reveal the compositional effects on surrogate reactivity at the diluted/stoichiometric condition, where n-heptane facilitates first-stage ignition reactivity for FGF-LLNL/E0 by initiating earlier and more rapid OH branching than n-butane for FGF-KAUST/E0. Sensitivity analyses highlight the importance of non-fuel-specific interactions between ethanol and surrogate sub-chemistries in controlling the reactivity of ethanol-blended surrogates. Direct experimental comparisons between the surrogates and FACE-F, as well as between the surrogate/EtOH and FACE-F/EtOH blends highlight the need of high-fidelity surrogates that can fully replicate the target gasoline in properties in-cluding ignition reactivity and LTHR characteristics at extended conditions, as well as their response to ethanol blending. Overall, the model captures the experiments reasonably well. Nevertheless, the model displays increasing disagreement with experiments for the two surrogates at higher levels of ethanol blending, and this is found to be caused primarily by non-fuel-specific interactions between ethanol and surrogate component sub-chemistries. Futhermore, the inadequacy of the kinetic model to capture surrogate-to-surrogate differences at the diluted/stoichiometric condition suggests more physical testing is needed to facilitate more extensive model validation. (C) 2021 Published by Elsevier Inc. on behalf of The Combustion Institute.

Autoignition of ternary blends for gasoline surrogate at wide temperature ranges and at elevated pressure: Shock tube measurements and detailed kinetic modeling

Ignition delay of diisobutylene-containing multicomponent gasoline surrogates: Shock tube measurements and modeling study

A Shock Tube Experimental and Modeling Study of Multicomponent Gasoline Surrogates Diluted with Exhaust Gas Recirculation

Autoignition of Gasoline Surrogates Mixtures at Intermediate Temperatures and High Pressures

Development of a Reduced Four-Component (Toluene/n-Heptane/iso-octane/ethanol) Gasoline Surrogate Model

Experimental and Kinetic Study of Diesel/gasoline Surrogate Blends over Wide Temperature and Pressure

Experimental and Numerical Studies on Three Gasoline Surrogates Applied in Gasoline Compression Ignition (GCI) Mode

Detailed kinetic models for the low-temperature auto ignition of gasoline surrogates

Autoignition of toluene reference fuels at high pressures modeled with detailed chemical kinetics

A Semi-Detailed Chemical Kinetic Model of a Gasoline Surrogate Fuel for Internal Combustion Engine Applications

Autoignition and Preliminary Heat Release of Gasoline Surrogates and Their Blends with Ethanol at Engine-Relevant Conditions: Experiments and Comprehensive Kinetic Modeling

Probing the Antagonistic Effect of Toluene As a Component in Surrogate Fuel Models at Low Temperatures and High Pressures. A Case Study of Toluene/dimethyl Ether Mixtures

Experimental and modeling validation of a large diesel surrogate: Autoignition in heated rapid compression machine and oxidation in flow reactor

A methodology to replicate LTGC engine conditions in a single-zone model and validate gasoline surrogate formulations versus experimental measurements

An Experimental and Modeling Study of Autoignition Characteristics of Two Real Low-Octane Gasoline Fuels in a Heated Rapid Compression Machine at Elevated Pressures

Gas-phase Autoignition of Diesel/gasoline Blends over Wide Temperature and Pressure in Heated Shock Tube and Rapid Compression Machine

Experimental and Modeling Study on Autoignition of a Biodiesel/n-Heptane Mixture and Related Surrogate in a Heated Rapid Compression Machine

Prediction and Measurement of Critical Properties of Gasoline Surrogate Fuels and Biofuels

The Experimental Study of Autoignition of Tetralin at Intermediate-to-high Temperatures

Experimental and Modeling Study of the Autoignition for Diesel and N-Alcohol Blends from Ethanol to N-Pentanol in Shock Tube and Rapid Compression Machine

Autoignition of CRC Diesel Surrogates at Low Temperature Combustion Conditions: Rapid Compression Machine Experiments and Modeling