Abstract:A new jet fuel surrogate was developed in this work by emulating real jet fuel properties including physical, gas phase chemical properties and threshold sooting index (TSI). An intelligent optimization methodology was proposed to calculate the species composition that inherently satisfies both the physical and chemical characteristics as well as sooting tendency. Eight properties were selected as the target properties for the jet fuel surrogate development, including liquid density, viscosity, surface tension, cetane number (CN), hydrogen carbon (H/C) ratio, molecular weight (MW), lower heating value (LHV) and TSI. As a result, the CN, H/C ratio, LHV, TSI and density of the new jet fuel surrogate are reproduced excellently with very little deviations within 3%. The averaged deviation of viscosity is −6.318% and the deviations of MW is 9.776%. As the highest deviation among all properties, the averaged deviation of surface tension is 11.76%. Based on the newly developed jet fuel surrogate, a skeletal jet fuel surrogate mechanism with 5 components including decalin, n-dodecane, iso-cetane, iso-octane and toluene was developed. The skeletal jet fuel surrogate mechanism was significantly compacted into 74 species and 189 reactions by describing the chemistries for the oxidation of large molecules C4–Cn and small H2/CO/C1 molecules respectively, which makes it practical to be used for 3-D engine combustion simulations. The validations of ignition delay times present reasonable agreement between experiment and predictions over a wide range of equivalence ratios (0.5–2.0) and pressures (8–30 atm), except for a shift of negative temperature coefficient (NTC) region towards higher temperatures at Φ = 1.5, 20 atm: in the simulation the NTC region is from 830 K to 950 K while in the experiment the NTC region is from 740 K to 890 K. The predicted species concentrations can reproduce the trend of the experimental data, especially for O2, CO and CO2. The simulated laminar flame speed at 400 K and 470 K are with absolute averaged deviations of 3.5% and 4.06% respectively. The constant volume spray and combustion validations are reasonably good. In the engine combustion validations, a multistep soot model was embedded into the new jet fuel surrogate mechanism. The predicted in-cylinder pressure can reproduce the experimental data, expect for small deviations after the peak pressure (the averaged deviation is around 6.2% after the peak pressure). The embedded soot model can well reproduce the trend of the experimental data. It can be concluded that this new jet fuel surrogate mechanism is compact and robust for the utilization in diesel engine combustion simulation.

Experimental and Numerical Studies on Three Gasoline Surrogates Applied in Gasoline Compression Ignition (GCI) Mode

Experimental Studies on the Co-Effects of Engine Operating Parameters and Fuel Functional Groups on the Performance and Emissions of a GDI Engine

An Experimental and Modeling Study of Autoignition Characteristics of Two Real Low-Octane Gasoline Fuels in a Heated Rapid Compression Machine at Elevated Pressures

A Shock Tube Experimental and Modeling Study of Multicomponent Gasoline Surrogates Diluted with Exhaust Gas Recirculation

Influences of Fuel Injection Strategies on Combustion Performance and Regular/irregular Emissions in a Turbocharged Gasoline Direct Injection Engine: Commercial Gasoline Versus Multi-Components Gasoline Surrogates

Experimental and numerical study on suitable diesel fuel surrogates in low temperature combustion conditions

Ignition delay of diisobutylene-containing multicomponent gasoline surrogates: Shock tube measurements and modeling study

Experimental and Kinetic Study of Diesel/gasoline Surrogate Blends over Wide Temperature and Pressure

Collaborative optimization of fuel composition and operating parameters of gasoline compression ignition (GCI) engine in a wide load range

Numerical study of spray combustion and soot emission of gasoline–biodiesel fuel under gasoline compression ignition-relevant conditions

Experimental study on wide load operation of gasoline compression ignition engine: Real distillate gasoline versus primary reference fuel

Experimental and Modelling Investigations of the Diesel Surrogate Fuels in Direct Injection Compression Ignition Combustion

Development of a New Jet Fuel Surrogate and Its Associated Reaction Mechanism Coupled with a Multistep Soot Model for Diesel Engine Combustion

A Semi-Detailed Chemical Kinetic Model of a Gasoline Surrogate Fuel for Internal Combustion Engine Applications

Probing the Chemical Kinetics of Minimalist Functional Group Gasoline Surrogates

Experimental Comparison of Combustion and Emission Characteristics Between a Market Gasoline and Its Surrogate

Combustion and Emissions of Isomeric Butanol/gasoline Surrogates Blends on an Optical GDI Engine

Optimizing Gasoline Compression Ignition Engine Performance and Emissions: Combined Effects of Exhaust Gas Recirculation and Fuel Octane Number

Autoignition of ternary blends for gasoline surrogate at wide temperature ranges and at elevated pressure: Shock tube measurements and detailed kinetic modeling

Autoignition of CRC Diesel Surrogates at Low Temperature Combustion Conditions: Rapid Compression Machine Experiments and Modeling

Numerical Investigation on Low Octane Gasoline-Like Fuel Compression Ignition Combustion at High Load