Abstract:Given the complexity and uncertainty of diesel compositions, it is of great challenges to study the fundamental combustion processes and mechanism of diesel fuel, in particular the gaseous and particulate pollutant formation mechanisms. A reasonably designed diesel surrogate is proved to be an effective way to study the fundamental combustion mechanism of diesel fuel. However, most existing diesel surrogates mainly adopt light hydrocarbon components, increasing the difficulty of accurately reflecting the physical and chemical properties of practical diesel fuel or the combustion and emissions characteristics of diesel engines. Therefore, in this study, a methodology to construct diesel surrogates with C10 similar to C18 hydrocarbon components based on fuel properties and engine combustion and emissions characteristics was proposed. First, the key physical and chemical fuel properties that affect fuel injection, atomization, ignition, combustion, engine efficiency and emissions were discussed in detail. Second, 13 candidate components were chosen to represent n-alkanes, iso-alkanes, cycloparaffins and aromatics and blended with commercial diesel fuel in different proportions. Fuel injection, spray, ignition and combustion phase, engine efficiency and emissions versus changed blending component and proportion were systematically investigated. In particular, the effects of the cetane number and fuel volatility on combustion and emissions were investigated under fixed injection timing and fixed ignition timing conditions, respectively. Afterward, the key physical and chemical parameters of the surrogate fuels were defined, and the constraint equations were constructed for different parameters. Considered the uncertainties in the components and physicochemical properties of the actual diesel fuel, it is believed that the construction of surrogate fuel has only reasonable solutions and there is no optimal solution. Finally, three diesel surrogates were proposed from the feasible domains of constraint equations, including a 3 Components surrogate (41.3% n-hexadecane, 36.8% 2,2,4,4,6,8,8-heptamethylnonane (HMN), 21.9% 1-methylnaphthalene, by mol.), a 5-Components surrogate (21.6% n-hexadecane, 15.5% n-octadecane, 26.0% HMN, 20.7% 1-methylnaphthalene, 16.2% decalin, by mol.) and a 7-Components surrogate (21.5% n-hexadecane, 15.4% n-octadecane, 25.8% HMN, 13.7% 1-methylnaphthalene, 8.1% decalin, 8.1% n -butyl-benzene, 7.4% n-butylcyclohexane, by mol.). It is found that the surrogates proposed in this study can accurately reproduce actual engine combustion characteristics. Also, the gaseous emissions of the 5 Components surrogate are closest to those of the target diesel fuel in the tested engine operation conditions. (C) 2018 Elsevier Ltd. All rights reserved.

Experimental Comparison of Combustion and Emission Characteristics Between a Market Gasoline and Its Surrogate

Development of a Reduced Four-Component (Toluene/n-Heptane/iso-octane/ethanol) Gasoline Surrogate Model

Development of a New Jet Fuel Surrogate and Its Associated Reaction Mechanism Coupled with a Multistep Soot Model for Diesel Engine Combustion

A methodology to replicate LTGC engine conditions in a single-zone model and validate gasoline surrogate formulations versus experimental measurements

Experimental and Numerical Studies on Three Gasoline Surrogates Applied in Gasoline Compression Ignition (GCI) Mode

Surrogate Fuels for Premixed Combustion in Compression Ignition Engines

Experimental Evaluation of Various Gasoline Surrogates Based on Soot Formation Characteristics

Experimental and Kinetic Study of Diesel/gasoline Surrogate Blends over Wide Temperature and Pressure

Probing the Chemical Kinetics of Minimalist Functional Group Gasoline Surrogates

Influences of Fuel Injection Strategies on Combustion Performance and Regular/irregular Emissions in a Turbocharged Gasoline Direct Injection Engine: Commercial Gasoline Versus Multi-Components Gasoline Surrogates

A New Methodology for Diesel Surrogate Fuel Formulation: Bridging Fuel Fundamental Properties and Real Engine Combustion Characteristics

FACE gasoline surrogates formulated by an enhanced multivariate optimization framework

Development of a 5-Component Gasoline Surrogate Model Using Recent Advancements in the Detailed H2/O2/CO/C1-C3 Mechanism for Decoupling Methodology

Recent Progress in Gasoline Surrogate Fuels

Surrogate Fuel Development Based on Droplet Combustion: Comparison of Multi-component Mixtures with an Aviation Fuel

Autoignition and Preliminary Heat Release of Gasoline Surrogates and Their Blends with Ethanol at Engine-Relevant Conditions: Experiments and Comprehensive Kinetic Modeling

Experimental Studies on the Co-Effects of Engine Operating Parameters and Fuel Functional Groups on the Performance and Emissions of a GDI Engine

Combustion and Emissions of Isomeric Butanol/gasoline Surrogates Blends on an Optical GDI Engine

Surrogate Fuels for the Simulation of Diesel Engine Combustion of Novel Biofuels

Experimental and Modelling Investigations of the Diesel Surrogate Fuels in Direct Injection Compression Ignition Combustion

Comparison and analysis of the emissions of a small non-road spark-ignition engine operating under different alcohol–gasoline blended fuels