Abstract:Proton exchange membrane electrolytic cells (PEMECs) are considered cleaner energy-conversion devices with potential commercial applications in hydrogen production. However, the heat- and mass-transfer characteristics inside the cell remain unclear, and its performance should be optimized to achieve future commercial applications. A three-dimensional multi-physical field-coupling model is developed for the PEMEC. Subsequently, a multi-objective optimization design is used to optimize the structural and operational parameters of the cell based on a neural-network regression model. The results of the sensitivity and response-surface analyses indicate that the initial working temperature has the most significant impact on the reaction temperature, the current density is increased by up to 65.22% under the coupling effects of temperature and flow rate. The cell performance is also enhanced by the increased channel width and depth, although this is accompanied by limitations. Under the combined effects of increasing the working temperature and channel width or height, the current density can be increased by a maximum of 65.22% and 38.61%, respectively. The improvement in cell performance requires a trade-off between improved mass and heat transfer and larger pressure drop, and the optimal design achieves this trade-off. In optimal design, the current density is improved by up to 16.56%, the oxygen mass fraction of the catalytic layer is reduced by 40.90% compared with the original design, accompanied by a reasonable pressure drop and uniform temperature distribution. This study provides a novel perspective for the optimization of the PEMEC to promote its commercial application, offering a reference for further advanced optimization of cell performance and reducing trial-and-error costs. It is also expected to have practical applications in energy conservation and sustainable development.

Optimum Design and Performance Simulation of a Multi-Device Integrated System Based on a Proton Exchange Membrane Fuel Cell

Development of Integrated Thermally Autonomous Reformed Methanol-Proton Exchange Membrane Fuel Cell System

Modeling Water and Thermal Transients Inside Proton Exchange Membrane for Vehicle Application Fuel Cells

Multi-objective Optimization Design and Sensitivity Analysis of Proton Exchange Membrane Electrolytic Cell

A single-phase, non-isothermal model for PEM fuel cells

Thermodynamic Modeling and Exergy Analysis of Proton Exchange Membrane Fuel Cell Power System

Modelling and Simulation System of Proton Exchange Membrane Fuel Cell

The Design and Development of a PEMFC Testing System

Configuration Design and Parametric Optimum Selection of a Self-Supporting PEMFC

Comprehensive performance assessment and multi-objective optimization of high-power proton exchange membrane fuel cell system under variable load

Modelling of a PEM Fuel Cell System with Propane ATR Reforming

Operating Performance and Energy Flow Modeling for a Hundred-Kilowatt Proton Exchange Membrane Fuel Cell Stack Test System

Simulation and Optimization of Working Parameters of Proton Exchange Membrane Fuel Cell

Performance enhancements of power density and exergy efficiency for high-temperature proton exchange membrane fuel cell based on RSM-NSGA III

Performance evaluation and parametric optimization of a proton exchange membrane fuel cell/heat-driven heat pump hybrid system

Coupling of high-temperature proton exchange membrane fuel cells with methanol steam reforming: Modeling and simulation for an integrated coupled for power generation system

Design and Simulation of Proton Exchange Membrane Fuel Cell System

Dynamic Modeling and Operation Strategy of an NG-fueled SOFC-WGS-TSA-PEMFC Hybrid Energy Conversion System for Fuel Cell Vehicle by Using MATLAB/SIMULINK

Thermodynamic Modeling and Performance Analysis of Vehicular High-Temperature Proton Exchange Membrane Fuel Cell System

Performance Analysis and Optimization of a High-Temperature PEMFC Vehicle Based on Particle Swarm Optimization Algorithm

Performance, Efficiency, and Flexibility Analysis of a High-Temperature Proton Exchange Membrane Fuel Cell-Based Micro-Combined Heat-and-Power System with Intensification of the Steam Methane Reforming Step by Using a Millistructured Reactor