Abstract:Ultra-short pulse laser interaction with diamond materials has attracted extensive interest in micro- and nano-machining, especially for the fabrication of micro tools, because of the straightforward method and high precision. Thanks to the development of chemical vapor deposition (CVD) technology, high-quality CVD diamonds are employed in more varieties of tools as performance-enhancing coatings. The purpose of the experiments reported here was to explore the machinability of CVD diamond coating under the irradiation of femtosecond (fs) pulsed laser. The factor-control approach was adopted to investigate the influence of scanning speed, single pulse energy and repetition rate on the surface quality and carbon phase transition of CVD diamond coating. The material removal rate and surface roughness were evaluated. The interaction mechanism of scanning speed, single pulse energy, and repetition rate were discussed, and the fs laser ablation threshold of CVD diamond coating was calculated. It was demonstrated that two ablation mechanisms (weak and intensive) were in existence as evidenced by the distinct surface morphologies induced under different processing conditions. A strong dependence on the variation of scanning speed and pulse energy is identified in the examination of surface roughness and removal rate. Lorentzian–Gaussian deconvolution of Raman spectra illustrates that fs laser irradiation yields a strong modification effect on the coating and release the compressive stress in it. Furthermore, a newly defined parameter referring to the fs laser energies applied to unit volume was introduced to depict the degree of ablation and the Taguchi method was used to figure out the significance of different parameters. The ablation threshold of CVD diamond coating at the effective pulses of 90 is calculated to be 0.138 J/cm2.

Influence of Femtosecond Laser-Induced Periodic Surface Structures on the Tribological Performance of CVD Nano-Crystalline Diamond Films

Influence of nanosecond laser processed surface textures on the tribological characteristics of diamond films sliding against zirconia bioceramic

Tribological Behavior Between Micro- and Nano-Crystalline Diamond Films under Dry Sliding and Water Lubrication

Tribological Properties of Cvd Diamond Films Against Zirconia Ceramic

On the Role of a ZDDP in the Tribological Performance of Femtosecond Laser-Induced Periodic Surface Structures on Titanium Alloy against Different Counterbody Materials

Synergistic Friction-Reducing and Anti-Wear Behaviors of DLC on NCD Films Via In-Situ Synthesis by Fs Laser Ablation

Study on Femtosecond Laser Processing Characteristics of Nano-Crystalline CVD Diamond Coating

A STUDY OF FEMTOSECOND LASER POLISHING OF CVD NANOPOLYCRYSTALLINE DIAMOND FILMS

Effect of Bottom Micro-Crystalline Diamond (MCD) Layer and Top Nano-Crystalline Diamond (NCD) Layer Onto the Tribological Behavior of (MCD/NCD) Bilayer Film

Investigation on the Long-Duration Tribological Performance of Bilayered Diamond/Diamond-Like Carbon Films

Application of Nano-Crystalline Diamond in Tribology

Frictional and Wear Behavior of Micro-Crystalline and Nano-Crystalline Diamond Films

Surface Modification and Effects on Tribology by Laser Texturing in Al2O3.

Influence of laser surface texturing on tribological performance of mechanical components

Experimental and Molecular Dynamics Investigation on Tribological Properties of Nanocrystalline Diamond Films.

Synergistic effect of surface textures and DLC coatings for enhancing friction and wear performances of Si3N4/TiC ceramic

Crystal Orientation Control of HFCVD Diamond Spherical Film Tools and Tribological Behavior on Steel

Fabrication and mechanical measurements of micro- and nano-textured surfaces induced by laser processing

Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact

Tribological Performance of Diamond Films with Different Roughnesses of Silicon Nitride Substrates and Carbon Source Concentrations

Fabrication and tribological characterization of laser textured engineering ceramics: Si3N4, SiC and ZrO2