Abstract:Among high-temperature sorbents, the remarkable stability, low regeneration temperature, and high cyclic sorption capacity of Li4SiO4 sorbent have attracted considerable attention. However, the high cost of lithium sources during the synthesis of Li4SiO4 has restricted its practical application. Meanwhile, the extensive utilization of lithium-ion batteries (LIBs) in renewable energy development has sparked concerns regarding the proper management of numerous discarded LIBs. The successful combination of the recycling of spent LIBs with carbon capture technology using Li4SiO4 sorbent can not only alleviate the waste problem of a large number of LIBs, but also effectively reduce the cost of materials required to capture CO2. Herein, LIBs were utilized to synthesize low-cost Li4SiO4 sorbents for CO2 capture, and the CO2 sorption/desorption performance was evaluated. The optimal regeneration temperatures of Li4SiO4 sorbents from LIBs are generally lower than the traditional regeneration temperature (>700 ℃) because of the existence of Li2SiO3 in fresh Li4SiO4 sorbents from LIBs, thereby reducing the energy consumption of CO2 capture. The results showed that the extraction rate of Li2CO3 increased by 69.92 % and 77.28 % respectively when graphitic carbon (GC) and banana peel activated carbon (BAC) were introduced during the extraction process compared to the absence of reductant. However, Li4SiO4 modified with graphitic carbon (Li4SiO4-GC) shows better cyclic CO2 capture performance than that modified with activated carbon from banana peels (Li4SiO4-BAC). It is found that Li4SiO4-GC could maintain a high sorption of 0.23 g/g after 50 cycles under the conditions of sorption temperature of 525 ℃, desorption temperature of 650 ℃, and 15 vol%CO2, owing to its more diverse variety of crystal phase substances, particularly Li3NaSiO4 crystal phase that plays a positive promoting role in the cyclic sorption/desorption. In addition, Li4SiO4-GC has more developed pore structure after cyclic reactions that other sorbents, which provides more channels for the diffusion of lithium ions, oxygen ions, and sodium ions, making it easier to adsorb more CO2 and increasing the overall reaction rate.

Fabrication of Lithium Silicate-Based Sorbents from Sediment Treated by Citric Acid with Enhanced Co2 Sorption Property

Effect of K2CO3 doping on CO2 sorption performance of silicate lithium-based sorbent prepared from citric acid treated sediment

Calcination–carbonation Durability of Nano CaCO3 Doped with Li2SO4

Unveiling the Porosity Effect of Superbase Ionic Liquid-Modified Carbon Sorbents in CO 2 Capture from Air

Alkali-Doped Lithium Orthosilicate Sorbents for Carbon Dioxide Capture

Preparation of Novel Li4 SiO4 Sorbents with Superior Performance at Low CO2 Concentration.

Preparation method for lithium silicate CO2 adsorbent

Synthesis and Adsorption Process of Lithium Taking Used as High-Temperature CO2 Sorbents

Structurally improved Li4SiO4 sorbents derived from lithium salicylate precursor for enhanced CO2 capture

High-performance Li4SiO4 Sorbents Prepared from Solid Waste for CO2 Capture

Synthesis of high-performance Li4SiO4 sorbent for CO2 capture using Li2CO3 extracted from spent lithium batteries

Combined Synthesis of Li4SiO4 Sorbent with High CO2 Uptake in the Indirect Carbonation of Blast Furnace Slag Process

Fabrication of Efficient and Stable Li4SiO4-based Sorbent Pellets Via Extrusion-Spheronization for Cyclic CO2 Capture

Enhancement of Reactivity in Li4SiO4-based Sorbents from the Nano-Sized Rice Husk Ash for High-Temperature CO2 Capture

Absorption Behaviors Study on Doped Li4SiO4 under a Humidified Atmosphere with Low CO2 Concentration

Understanding the Competition Between Carbonation and Sulfation of Li4SiO4-based Sorbents for High-Temperature CO2 Capture

CO2 high-temperature sorbent (Al, Fe, Ti) CO-doped Li4SiO4 from fly ash-derived SiO2 aerogel: In-situ synthesis, enhanced capture ability and long cycle stability

Molten shell-activated, high-performance, un-doped Li4SiO4 for high-temperature CO2 capture at low CO2 concentrations

Efficient carbon dioxide adsorption properties of cellular structure Li 4 SiO 4 sorbents prepared by additive manufacturing based on polymer-derived ceramics strategy

Fabrication of porous Li4SiO4 ceramic sorbent pebbles with high CO2 sorption capacity via the simple freeze-drying method

Impregnation Precipitation Preparation And Kinetic Analysis Of Li4sio4-Based Sorbents With Fast Co2 Adsorption Rate