Abstract:Crystalline silicon as an anode material for lithium-ion batteries (LIBs) has a theoretical capacity greater than 3600 mAh/g, an order of magnitude larger than the current anode materials of choice, graphite (~370 mAh/g). However, the use of silicon is hampered by several issues that hinder its widespread usage in LIBs. Chief among these is the large volume expansion that accompanies lithiation (>300%), which results in the self-pulverization of silicon during cycling and the degradation in stability and performance that accompanies it. Silicon also suffers from active lithium loss in its first cycle from the formation of Li x Si and the solid-electrolyte interphase (SEI), which irreversibly consumes lithium and decreases gravimetric/volumetric capacity (typically >20% capacity loss after the formation cycle). This capacity loss coupled with mechanical and chemical degradation leads to poor capacity retention and short cycle life. Pre-lithiation of silicon and other potential anode materials ( e.g. SiO x ), a process of inserting additional Li into Si prior to battery operation, is thus desired to compensate for lithium consumption and to maintain the high capacity associated with silicon. Here, we demonstrate a simple and scalable method for the ex situ ( i.e. outside the cell) electrochemical synthesis of pre-lithiated silicon. In this method, a current is driven though an electrochemical stir-tank reactor composed of Si powder in electrolyte suspension and a Li containing anode. When Si particles contact the conductive inner surface of the reaction vessel, lithium ions in the electrolyte are reduced on the surface to form lithium-silicon compounds. The degree of lithiation is controlled by the applied current density, applied voltage, and/or runtime. This talk will describe the chemical and structural characteristics of pre-lithiated silicon synthesized with this technique, basic electrochemical properties of our lithiated material, and the specific advantages presented by the method vs other methods.

Surface passivated Li<i><sub>x</sub></i>Si with improved storage stability as a prelithiation reagent in anodes

Li+ Solvation Structure Modification in Chemical Prelithiation Enabling Spatially Homogeneous Sei Toward High Performance Siox Anode

Artificial Solid Electrolyte Interphase-Protected LixSi Nanoparticles: an Efficient and Stable Prelithiation Reagent for Lithium-Ion Batteries.

In Situ Formation of Ionically Conductive Nanointerphase on Si Particles for Stable Battery Anode

Regulation of Si Nanodomain Size and Its Effect on Electrochemical Performance in Prelithiated SiO Anode

Advanced Inorganic Lithium Metasilicate Binder for High-Performance Silicon Anode.

Lithium Pre-Storage Enables High Initial Coulombic Efficiency and Stable Lithium-Enriched Silicon/Graphite Anode.

Chemical Pre-lithiation of SiO x Anodes with a Weakly Solvating Solution of Polycyclic Aromatic Hydrocarbons for Lithium-Ion Batteries

Li-Si alloy pre-lithiated silicon suboxide anode constructing a stable multiphase lithium silicate layer promoting Ion-transfer kinetics

Metallurgically Lithiated SiOx Anode with High Capacity and Ambient Air Compatibility.

SiOx/C anodes with high initial coulombic efficiency through the synergy effect of pre-lithiation and fluoroethylene carbonate for lithium-ion batteries

Pre-lithiation synergized with magnesiothermic reduction to enhance the performance of SiO anode for advanced lithium-ion batteries

Chemical Preinsertion of Lithium: an Approach to Improve the Intrinsic Capacity Retention of Bulk Si Anodes for Li-ion Batteries.

(Digital Presentation) Approaches of Pre-Lithiation on Si Anode for Lithium-Ion Batteries

(Digital Presentation) Ex Situ Electrochemical Pre-Lithiation of Silicon for Lithium-Ion Battery Anodes

Facilitating prelithiation of silicon carbon anode by localized high‐concentration electrolyte for high‐rate and long‐cycle lithium storage

Constructing a Robust Solid-Electrolyte Interphase Layer via Chemical Prelithiation for High-Performance SiO<i><sub>x</sub></i> Anode

Surface Fluorination of Reactive Battery Anode Materials for Enhanced Stability.

Pre-Lithiating SiO Anodes for Lithium-Ion Batteries by a Simple, Effective, and Controllable Strategy Using Stabilized Lithium Metal Powder

Li2SiF6 in Situ Embedded in an Amorphous SiO Matrix to Inhibit Volume Expansion During Prelithiation

Elucidating the Role of Prelithiation in Si‐based Anodes for Interface Stabilization