Abstract:The PDEDTQ is introduced as the third component into the JD40‐BDD20:PA‐5 host blend to fabricate the high‐performance ternary all‐polymer solar cells (all‐PSCs) with a power conversion efficiency (PCE) of 18.47%. It can not only transfer energy to JD40‐BDD20 and form extra exciton dissociation channels, but also regulate the miscibility between JD40‐BDD20 and PA‐5 to form a high‐quality network with uniform distribution on the micron scale. Herein, efficient ternary all‐polymer solar cells (all‐PSCs) are fabricated by employing PDEDTQ that possesses down‐shifted highest occupied molecular orbital (HOMO) level and blue‐shifted absorption with higher maximum absorption coefficients compared with the host donor JD40‐BDD20 as a guest donor into the JD40‐BDD20:PA‐5 host blend. The enhanced light‐harvesting and the energy transfer from PDEDTQ to JD40‐BDD20 can be observed in the ternary device, which conduces to improving the short circuit current density (JSC). Additionally, the PDEDTQ shows relatively weak crystalline and well miscibility with the JD40‐BDD20, meaning that the morphology can be tuned using the PDEDTQ. Subsequently, a more uniform and fine‐divided network with slightly weakened crystalline occurs in the ternary blend film, implying that a more intermixing domain with a higher density of donor/acceptor (D/A) interfaces may be formed. Thus, compared with JD40‐BDD20:PA‐5, the ternary device obtained enhanced exciton dissociation and charge extraction, reducing charge recombination and energy loss (Eloss). Ultimately, in addition to guaranteeing outstanding fill factor (FF), the higher JSC and improve open circuit voltage (VOC) are achieved and then boosted the power conversion efficiency (PCE) from 17.39% to 18.47%, which is one of the highest PCEs for the all‐PSCs. Overall, this work provides guidance on forming a high‐quality network with uniform distribution of D/A using ternary strategy, and then obtaining high‐efficiency all‐PSCs processed using non‐halogenated solvent.

Chlorinated Polymerized Small Molecule Acceptor Enabling Ternary All-Polymer Solar Cells with over 16.6% Efficiency

A chlorinated polymer promoted analogue co-donors for efficient ternary all-polymer solar cells

Achieving over 17% efficiency of ternary all-polymer solar cells with two well-compatible polymer acceptors

Improved Molecular Ordering in a Ternary Blend Enables All‐Polymer Solar Cells over 18% Efficiency

Over 18% efficiency ternary all-polymer solar cells with high photocurrent and fill factor

All‐Polymer Solar Cells with 17% Efficiency Enabled by the "End‐Capped" Ternary Strategy

Ternary All-Polymer Solar Cells with Two Synergetic Donors Enable Efficiency over 14.5%

Ternary All-Polymer Solar Cells with 8.5% Power Conversion Efficiency and Excellent Thermal Stability.

Manipulating Polymer Backbone Configuration via Halogenated Asymmetric End-Groups Enables Over 18% Efficiency All-Polymer Solar Cells

Ternary Polymer Solar Cells with High Efficiency of 14.24% by Integrating Two Well‐Complementary Nonfullerene Acceptors

Oligomeric Acceptor Enables High‐Performance and Robust All‐Polymer Solar Cells with 17.4% Efficiency

Layer‐by‐Layer‐Processed Ternary All‐polymer Organic Solar Cells with 17.74% Efficiency Enabled by introducing a designed narrow‐bandgap guest polymer acceptor

Ternary All‐Polymer Solar Cells with Efficiency up to 18.14% Employing a Two‐Step Sequential Deposition

Improving Miscibility of Polymer Donor and Polymer Acceptor by Reducing Chain Entanglement for Realizing 18.64% Efficiency All Polymer Solar Cells

Binary all-polymer solar cells with efficiency over 17% by fine-tuning halogenated thiophene linkers of polymer acceptors

Ternary Polymer Solar Cells Based-on Two Polymer Donors with Similar HOMO Levels and an Organic Acceptor with Absorption Extending to 850 Nm

Ternary Strategy Enables Non‐Halogenated Solvent‐Processed All‐Polymer Solar Cells with High Efficiency Over 18%

High‐Performance Green Solvent Processed Ternary Blended All‐Polymer Solar Cells Enabled by Complementary Absorption and Improved Morphology

Efficient Non-Halogenated Solvent Processed Ternary All-Polymer Solar Cells with A Favorable Morphology Enabled by Two Well-Compatible Donors.

High‐Efficiency P3HT‐Based All‐Polymer Solar Cells with a Thermodynamically Miscible Polymer Acceptor

Nonconjugated Terpolymer Acceptors with Two Different Fused-Ring Electron-Deficient Building Blocks for Efficient All-Polymer Solar Cells